answersLogoWhite
Chevy Corvette
Chevy Tahoe
Ford Expedition XLT
Ford F-150

How do you remove a door panel on a 1995 Corvette?


Top Answer
User Avatar
Wiki User
2011-09-13 06:13:29
2011-09-13 06:13:29

Your in luck, Just the year I own... start by removing the press in keepers in the bottom of the door panel(round, interior color)there are 5 of these along the very bottom of the door panel. next emove the 2 Phillips screws from the interior door pull handle, the one you use to close the door(look straight down into it) then remove the one Phillips screw from behind the interior door relese handle. carefully with a 90 degree pick, pull straight out on the manuel door lock knob, it will pry off, then slip that piece forward and off so the door panel will clear the lock rod, the mirror/window switches simply pry out of the panel, I just worked my release handle and switches back through the holes in the door panel when removing my panel, slightly tug the door panel up and towards you, it should come right off, good luck and be careful....Kenny W.

Good tip by Kenny. I have a 1996 Corvette and followed his instructions but there were two more hidden screws he did not mention that must be removed prior to attempting to remove the door panel. One is behind the door lamp above the release handle. Gently pry the top of the lamp cover down until it releases then gently pull it from the cavity. You will now be able to see the first hidden screw. The second hidden screw is located behind the manual lock that was pried loose. Once you have removed 5 "press in keepers" and 5 screws the door panel is free to come off.... Kevin H.

Related Questions

User Avatar

Remove the inside door panel of your 1982 Chevy Corvette. Remove the window retaining clips. The window will lift out.

User Avatar

How do I remove the left side door panel of a 1995 Gmc Sierra without breaking the door panel?

User Avatar

remove front door panel 1995 Nissan maxima

User Avatar

Use the right sized screwdriver, remove the screws and panels from the door panel and pull the panel away. Remove the wiring connections, and the panel should come free.

User Avatar

Your in luck, Just the year I own... start by removing the press in keepers in the bottom of the door panel(round, interior color)there are 5 of these along the very bottom of the door panel. next emove the 2 Phillips screws from the interior door pull handle, the one you use to close the door(look straight down into it) then remove the one Phillips screw from behind the interior door relese handle. carefully with a 90 degree pick, pull straight out on the manuel door lock knob, it will pry off, then slip that piece forward and off so the door panel will clear the lock rod, the mirror/window switches simply pry out of the panel, I just worked my release handle and switches back through the holes in the door panel when removing my panel, slightly tug the door panel up and towards you, it should come right off, good luck and be careful....Kenny W. How do you remove a door panel on a 1995 Corvette How do you remove a door panel on a 1995 Corvette


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.