How do you remove a starter from a 1989 Corvette?
disconnect the negative battery cable. raise the vehicle. remove the 2 electrical connectors on the starter solenoid. remove the 2 bolts holding the starter in noting the position of the starter shim if equipped with one. remove starter from vehicle. installation is the reverse. You will have to remove the exhaust cross over pipes first.
What all is involved to replace a starter on a 1989 Chevrolet cheyenne truck 350 motor automatic 1500 series?
# Disconnect negative battery cable # Raise and support car on jackstands # Remove the brackets supporting the starter # Remove the 2 starter motor to engine bolts and let the starter drop down far enough to allow removal of the nuts attaching the wires to the starter solenoid and battery cable # Separate the starter from the engine
Disconnect the negative battery cable from the battery, under the car you will see the starter on the rear of the engine there are two electrical connections disconnect the cables from the starter, there are 2 or 3 bolts attaching it to the flywheel cover remove those bolts, (watch so it doesn't fall on you it is heavy) remove the starter and replace it with the reverse of these instructions.