Disconnect the battery, preferrably the negative post. Two bolts hold the starter to the engine block. They're 13MM or 1/2 inch (same thing basically) Pull the bolts, then disconnect the electrical. The starter is low on the back side of the engine, right in front of the driver.
how to remove the starter from a 92 s-10 4x2 with a 2.8 engine
Remove the positive battery cable from your 2000 Saturn battery. Remove the cables from the front of the starter. Remove the three starter retaining bolts. Reverse the process to install the new starter.
Remove the positive cable from your 1992 Chevy Lumina battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
The starter for a 1999 Saturn is on top of the transmission under the air filter box. Remove the filter box for easy access.
with great skill and dificulty
Disconnect the battery Raise the vehicle Remove the two nuts on the starter to get the wires off 10 mm and 13 mm Remove the two bolts holding the starter to the engine block and remove the starter
Wally of Hagerstown, MD Please see my answer on preceeding questions about Cadillac starter removal.
1. Remove the negative battery cable. 2. Remove wires on the starter. 3. Remove the two mounting bolts. They have 15mm heads. (The top bolt is hidden and hard to get to.) You may have to remove the solenoid (on top of the starter) to get to it. 4. Remove starter Replacement is the opposite of the removal.
Solenoid going bad remove and replace starter assembly.
remove bolts and replace it how do u think
To remove car parts, a person must have the right tools. For a person to remove a starter on a 1996 Saturn they would need a 1/2 inch socket, a 4 inch extension, a wrench, and pliers.Ê
remove passenger front tire then fold back the water guard then you will access to the starter