answersLogoWhite
Nissan Pathfinder
Toyota Sequoia
Ford Explorer XLT
Honda Civic EX

How do you remove a stereo from a 99 Civic?

323334

Top Answer
User Avatar
Wiki User
2015-07-15 21:20:52
2015-07-15 21:20:52

You will need to take out the glovebox, the panel underneath the steering wheel, and the panel in between the glovebox and the steering wheel. There are two screws under the glovebox that hold it in place. There are three screws in panel underneath the steering wheel and there are six screws in the panel in between the glove box and the other panel. After these are out of the way, there are two small screws that hold the stock radio in place. To get to these screws, you may have to unhook the A/C harness for better accessibility. Make sure when you put the new radio in that the radio antenna is hooked in all the way, otherwise you wont be listening to the radio.

1

Related Questions

User Avatar

How to remove factory stereo from 2001 honda civic?

User Avatar

To remove the stereo off of a 1999 Honda Civic loosen all of the mounting screws for the center console. Pull out the console is loosen the stereo mounting screws. With everything off pull the stereo and unplug the radio.

User Avatar

remove your the cover off the door panel to get to the stero.make sure u unplug it

User Avatar

Park your vehicle in the bronx. The stero will be out in no time.

User Avatar

in most cases removing the stereo from a civic involves taking off two nuts underneath the factory head unit, you should be able to reach behind the centre console and get at them

User Avatar

To remove a stock stereo from a 2005 Honda Civic LX all the mounting bolts need to be off. The center console will have all the necessary screws removed to reach the mounting bolts. When all the bolts are removed the radio unit will slide out.

User Avatar

To remove a stock stereo, you will first need to remove the bezel from the stereo. Then, pull the stereo out of the dashboard and remove the wiring harness.

User Avatar

Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out. Remove the wiring harness and the antenna cable.

User Avatar

Remove the retaining cover from your stereo. Remove the stereo retaining bolts. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.

User Avatar

Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out and remove the wiring harness and the antenna cable.

User Avatar

for the 96-99 models, unscrew the panels underneath the steering wheel, take out the glove box, and the panel attached to the cigarette outlet. they should all snap out after unscrewing them. Once you do this, look up underneath the dash at the back of the stock stereo. there with be two screws, you can either use a 10mm or Phillips head to take them out, it then easily slides out from there. good luck! Try www.streetdreams.com/tech/Honda/civic

User Avatar

Remove the retaining cover from your 2003 Suzuki stock stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness and the antenna cable from the back of the stereo.

User Avatar

Remove the decorative cover from your 2006 Chevy Express stereo. Remove the stereo retaining screws. The stereo will slide out. Remove the wiring harness and the antenna cable from the back of the stereo.

User Avatar

Remove the cover from your 2001 Chevy Silverado stereo. Remove the stereo retaining bolts. Remove the wiring harness and the antenna cable from the back of the stereo.

User Avatar

Remove the decorative stereo retaining cover. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness and the antenna cable.

User Avatar

Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.

User Avatar

remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo

User Avatar

The stereo can be removed from a Hyundai Excel by first removing the stereo front cover. Remove the retaining screws. Pull the stereo out and remove the wiring.

User Avatar

Remove the 2002 Dodge Durango factory stereo decorative cover. Remove the factory stereo retaining screws. Pull the factory stereo out. Remove the wiring harness and the antenna cable from the back of the stereo.

User Avatar

yes i want the code for the stereo

User Avatar

You need to take the bottom off first. There's like a slot for another stereo, take that slot off, then reach him unplug the wires inside. And just take it out.

User Avatar

Begin by removing the decorative stereo retaining cover from your 1999 Ford F2 50 pickup truck stereo. Remove the stereo retaining screws. The stereo will slide out. Remove the wiring harness and the antenna cable from the back of the stereo.

User Avatar

Remove the retaining cover from your factory stereo. Remove the factory stereo retaining bolts. Slide the factory stereo out. Remove the wiring harness and the antenna cable from the back of the factory stereo.

User Avatar

How do you remove stereo from 2000 nissan pathfinder?


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.