How do I get to the flywheel bolts on a 98 dodge dakota to remove a transmission
Remove the transmission oil pan Remove the transmission oil pan Remove the transmission oil pan
You have to remove the pan to drain the fluid.
The automatic transmission does not have a drain plug. You remove the pan to drain the fluid.
The Dodge Dakota transmission blueprint is also known as a transmission diagram. The transmission diagrams can be found at most Dodge dealerships.
what type of auto transmission is in a 89 dodge dakota 3.9
if its the same size motor it will.
you have to remove trans.after trans is removed remove tork.conv.check bushing in front pump you will find that it is bad
The trans in a Dakota is not controlled by vacuum.
A Dodge transmission does not have a turbo.
5/16 inch or 1/2 inch, depends on trans type.
The automatic transmission in a 2003 Dodge Dakota does not have bands.
It may fit, but it will not shift as they have different governor types.
How do you replace a transmission solenoid on a 2001 dodge Dakota 4.7 engine 4x4 location?
It is on the bottom of the transmission, inside the oil pan.
6 quarts transmission fluid
12ft lbs for transmission pan bolts
If they are Automatics it will not shift properly. It would bolt up if they are the same engine.
Remove the top and bottom radiator hoses including the transmission fluid, then remove the side mounting bolts, after that is completed, slide the radiator up and out of the engine compartment
it is located in the pan