You may have to remove the battery and air intake housing to gain access to the back of the passenger-side headlight assembly. Next you remove the (white) wiring harness plug by manually pressing it and pulling down. If there is dust accumulated inside the wiring plug and it doesn't easily come off, you may have to push it down with a screwdriver. Next there should be a black collar that rotates around the light bulb base (turn counterclockwise to Open). The collar itself will not come out. Once you rotate it, the bulb should pop out the back of the headlight assembly.
There was not a 1999 Honda Accord LXi made. Do you have a 1989 Honda Accord LXi?
right this is pretty intense....you take off the old headlamp, right? then..get this! you put the new one on eeeh!
Installation of what?
how do i remove the radio out of my 2001 Honda accord 2.oi v tec to replace with a CD player because it comes up coded
How do you replace a radiator on a 1991 Honda Accord
how do you replace the radiator on a 2003 V6 Honda Accord
i am going to replace my headliner in my 93 Honda accod, need to information
Remove oil pan for access
how to install and replace a rack and pinion on Honda accord 1994 lx
how do i remove the fan/blower motor on a 2001 Honda Accord LX?
1994 Honda accord ex remove rear rotor
How to replace a timing belt on Honda accord 94
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
unbolt it and then remove it. Put new one in then tighten it up
How do you remove an air condition belt on a 1994 Honda Accord EX?
Where is the transmission fluid temperature sensor on a 1998 Honda accord and how do you replace it?"
where is the water pump located on 1997 honda accord
how to change dimmer switch on 1997 Honda accord
any information on 87 Honda accord with the clutch/
to remove the bulb simply take the four screws that attach the front assembly and it will give you access to the bulb.
i have a 1998 honda accord the gear shift is locked...
how toreplace radiator in a 2001 honda accord ex four cylinder
Front studs on a 1999 Honda Accord are pressed in. First the studs must be removed using a hammer or press. Once remove each stud can be pressed in.
pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.