answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2009-07-21 02:50:16

You have to take off the inter door panel and on the inside there is a black plastic nut holding it in placet. Unscrew this and the door handle will come off after disconnecting the two latches. There is a u shaped clip that holds the lock in place.

001
๐ŸŒŽ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Loading...

Still Have Questions?

Related Questions

How do you remove 1992 dodge Dakota door handle?

Remove the 1992 Dodge Dakota inside door panel. The door handle mechanism will be visible. Remove the door handle linkage. Remove the door handle retaining bolts.


How do you remove the window handle from a 1995 dodge Dakota?

Pop back the plastic cover from the center of the crank and remove Allen or Philips screw. Handle will then pull off.


How do you remove interior door handle from 2001 GMC Sonoma pickup?

I believe the handle is one whole assy handle holder and lever. remove door panel and assy should rivet/bolt to door


How do you remove a door handle on a 03 dodge Dakota?

Apparently for Dodge Dakota's you need a special Door Handle remover tool.


How do you replace a fuel pump on a 1996 Dodge Dakota pickup?

You have to remove the fuel tank or truck bed to access it.


How do you remove window handle on a 1986 Mazda pickup?

there is a small clip between the handle and door panel that u have to remove it is easy if u have a small pick to hook it with then to install just place clip on handle and push on the window regulator shaft.


What kind of wrench or tool is needed to remove exterior door handle of 1996 Dodge Dakota?

pull the inner door panel off and remove the clips holding it in.


How do to remove the window crank handle to get inside the door of a 2003 Chevy S 10 pickup?

there is a C shaped clip behind the handle. I have the tool to remove it you can get them at auto zone. you can also use a small pick to pull clip out but watch out it will fling out


How do you remove window crank on 92 Chevy pickup?

A simple inexpensive tool is available at your local auto parts store. There is a C clip behind the handle that needs to be removed to release the handle.


How do you change the outside door handle on a 1990 D21 Nissan pickup truck?

you must pull inner door panel, window crank and inner handle then you have two 10 mm nuts holding outer door hanle on you must remove the release rod from handle remove nuts and replace handle assemble in reverse order


How to replace a door window on a 1995 Dodge Dakota pickup truck?

remove door panel, roll down window 1/3, unbolt from track


How do you remove the window crank of a 2003 Dodge Dakota?

door handle removal tool any auto part store in HELP section


How do you repair the passenger side door handle on a 1997 Chevy Cheyenne pickup?

You must replace the handle, they are made of plastic. For the inner- remove both screws in the door panel[in the grab handle] remove the trim from the door handle. Remove window crank and with proper tool remove door panel. Tool is cheap. With panel off, there will be one rivet holding old door handle in place. Drill out rivet [ 3/16 ] and slide whole door handle assembly forward. Carefully remove door and lock rods and reverse the process to assemble. Outer- One bolt is behind door panel and the other is on the outside edge of the door right behind the handle. Simply remove bolts, remove handle and swap door lock into new handle and replace.


How do you change pickup coil on a 1988 GMC 2500 pick up?

Remove Distributor,remove drive gear,remove shaft,remove pickup coil.


How do you remove the ignition switch in a 1988 Isuzu pickup?

how to remove lock cyliner switch 1988 Isuzu pickup


How to remove door handle 1987 Chevy?

Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.


How can you remove the front door handle on Seat Cordoba?

Remove the inside door panel. Remove the door handle linkage. Remove the door handle retaining bolts. The front door handle will come off.


How do you remove rear brake drum from a 1993 Toyota pickup?

How do you remove rear brake drum from a 1993 Toyota pickup?


How do you remove the window handle on a 200 s-10 Chevy pickup?

There is a retaining clip that has to be removed from behind the handle for it to come off. Your auto parts store can sell you an inexpensive tool to do that job without damaging the handle and door panel, probably for less than $10.


How do you replace the third door handle on a 2000 S-10?

Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.


How do you replace tailgate handle on Chevy 2000 s10?

First you need to remove the trim bezel around the handle on the outside of the tailgate. Then remove the three bolts on the inside of the tailgate,that hold the handle in place. Next remove the latching mechanism rods from the handle,and remove the handle from the tailgate.


How do you remove the evaporator on a 1994 Chevrolet pickup?

remove all the screws


How do you remove a window crank on a 1998 Chevy S10 pickup?

There is a "C" clip behind the handle that must be removed. Your local auto parts store can sell you an inexpensive tool to help you remove the clip without damage done.


How do you change the door handles on a 1991 S 10 pickup?

First you gotta remove the door panel and that will expose all you need to see. there will be two nuts holding the door handle on and you need to remove those. once done slip off the bar which controls the opening of the latch and finally take out the handle


How do you remove the inside door handle on a 2002 Intrepid?

You can't remove just the inside handle. The handle is part of the door panel.