Well, if you can remove the part and it is really in sad shape. Sandblasting works. But for a moderate case, try using a paint sander. Specially made for cars.
Spray more clear coat over the decals.
sure, it is called bace coat/clear coat system and they have been doing it since 1986 ish. Spray your bace till covered let it dry tack cloth the finish then spray your clear, follow directions on can I think the question is whether or not to mix the base coat WITH the clear before applying. It will defeat the purpose of the clear coat as a UV protectant to the base coat. You can do it but I certainly would not recommend it.
Yes it can if it has dried and your trying to remove it. It can damage your Clear Coat more than your actual car paint. If you remove it right away than no your car will be fine.
A clear coat or more depending on what you have painted. This will chip the clear coat not your colour coat. For best protection a two pack clear that when cured ends up as hard as nails to protect the finished products colour from damage. It also will chip but gives a good protection for the colour coat. !
Usually there is a base coat of a solid colour, a coat of the chameleon paint, and then a clear coat
If the scratch is in the clear coat, then there is a possibility to buff it out. Deep scratches into the color coat need to be color filled matching paint color) then clear coated over.
how do i remove rear spoiler on rx330 2004 model for repainting or recoating clear coat
The clear coat that would protect a quadding helmet is the Maxima SC1 Clear Coat.
Clear coat is applied over a base color for the gloss
If there is enough layers of clear coat let you can watersand it with 2000 grit sand paper then buff it out with rubbing compound then with some glaze made by 3m.
do you use hardner or reducer in clear coat car paint?
with your hands!
Spray more clear coat over the decals.
Clear nail polish is a special coat of nail polish to protect the other coat of nail polish
Answer tree sapprubbing alcohol works pretty good but it will damage the clear coat and paint.
sure, it is called bace coat/clear coat system and they have been doing it since 1986 ish. Spray your bace till covered let it dry tack cloth the finish then spray your clear, follow directions on can I think the question is whether or not to mix the base coat WITH the clear before applying. It will defeat the purpose of the clear coat as a UV protectant to the base coat. You can do it but I certainly would not recommend it.
Usually a 1.5 tip is prefferred when spraying clear coat.