Hyundai Excel

How do you remove fuel pump from a Hyundai excel 98?

012

Top Answer
User Avatar
Wiki User
Answered
2012-10-03 14:41:07
2012-10-03 14:41:07

You can get to the fuel pump by removing the rear seat and you will see a bolted down access panel for the fuel pump.

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions



i own a 1990 excel and we found it in fuel tank have to drop tank.


Mounted on top and inside the fuel tank.


Mounted on top and inside the fuel tank.



under the rear seat, round black cap in fuel tank, pump is inserted into fuel tank.


The fuel pump is located in the gas tank to get to it you got to remove the rear seat.


The fuel pump is inside the fuel tank on a Hyundai Sonata.


The fuel pressure regulator on a 2005 Hyundai Elantra is located on the fuel pump inside the fuel tank. To change it you must remove the back seat. Under the seat there is a axcess panel through the floorboard to the fuel pump. Un hook the fuel lines and wiring, remove the screws that hold the pump to the tank. Lift out the pump from the tank. The pressure regulator is on top of the pump.


on my 1994 hyundai excel 4 d00r sedan the fuel float is located inside the tank,,,however it can be reach from the trunk,removing a safety plate to the right inside the trunk ,then 3 screws holds the complete assembly,,,about the fuel pump itself it is definetley inside the gas tank,and you must drop the tank ,to get to the top of the tank plate,,,,you will see the fuel pump wiring going inside the tank.....


Remove fuel tank from vehicle and then remove fuel pump from tank.


In the fuel tank. You can see it through a panel in the floor behind the rear seat, but to get at it you have to remove the fuel tank.


On 2001 models the fuel filter is part of the fuel pump relieve the fuel pressure disconnect negative battery cable remove the back seat and take fuel pump cover off to get to fuel pump disconnect the electrical connector from fuel pump/fuel sending unit disconnect the high pressure hose and the fuel return hose from the fuel pump remove the fuel pump mounting flange screws lift the fuel pump and fuel pump or the fuel level sending unit separate the two units


You will need to remove the fuel pump wiring harness. Remove the fuel pump fuel lines. Remove the fuel pump retaining bolts. Reverse the process to install the new fuel pump.


You have to remove the fuel tank to access the pump.You have to remove the fuel tank to access the pump.


to remove the fuel pump you will have to remove the fuel tank as it is located inside the fuel tank


The mojority of fuel injected vehicles have the fuel pump in the fuel tank.


The fuel pump is in the fuel tank, you need to remove the fuel tank to remove the fuel pump.


This info is from a Hyundai forum. "There is a fuel filter which is located inside the gas tank. There is an access panel under the seat - secured by 4 screws. Remove the rear seat squab, remove the access pannel, de-pressurize the fuel system, release the fuel lines, unscrew the fuel pump securing ring, and lift out the fuel pump assembly."



Follow the fuel lines from the front to the fuel tank. The fuel pump is connected to the tank. You'll have to remove the tank to remove the pump. Follow the fuel lines from the front to the fuel tank. The fuel pump is connected to the tank. You'll have to remove the tank to remove the pump.


Drain the fuel from the fuel tank. Remove the fuel line. Remove the fuel pump retaining plate. Remove the retaining plate from the fuel pump. Reverse the process to install the new fuel pump.


Drain the fuel from your fuel tank. Remove the fuel pump retaining plate. Remove the fuel pump retaining bolts. Remove the wiring harness from the fuel pump. Reverse the process to install the new fuel pump.


the fastest and easiest way to get to the fuel pump is to unclip and remove the two bolts for the back seat and there will be a rubber casing on the left side of the car pull it off and there is your fuel pump


The 2000 Cadillac Escalade fuel pump is located in the fuel tank. Drain the fuel from the fuel tank. Remove the fuel line. Remove the fuel pump retaining plate. Remove the fuel pump. Reverse the process to install the new fuel pump



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.