From the engine bay on driver side, there is a bolt in the middle of the fuse box wire harness. Use a 1/4 socket or nut driver to remove. Remove harness. Inside there are two phillips head screws that hold the fuse box to the firewall, they are in opposing corners. Unscrew them and gently pull on the fuse box to remove. Be careful of wore ties and loom when pulling.
On the side of the dash, passanger side.
In the fuse box under the driver side dash above the e-brake pedal.
The fuse panel for a 2003 Jeep Wrangler is located behind the glove box. The owners manual describes how to remove the glove box to access the panel. Removing the glove box is simple.
The 2006 Jeep Commander does not have an interior box. The fuse box in the engine compartment is the only fuse box.
remove the glove box insert. a fuse panel is located there
The fuse box is under the hood on a 2008 Jeep Grand Cherokee.
The fuse box on a 2012 Jeep Liberty is under the hood next to the battery.
It's behind the glove box. Open the glove box and remove the strap on the right side, the box will fall right out.
Open the front passenger side door; it is on the side of the dash.
The fuse box is behind the glove box door.
The easiest way to disable your 1994 Chrysler New Yorker alarm is to remove the alarm fuse. The alarm fuse can be found in the fuse box.
A 2008 Jeep Wrangler has one fuse box, it is under the hood next to the battery.