answersLogoWhite

0


Best Answer
Copy

Removing a ignition lock cylinder from a 2002 Ford Windstar with no key

User Avatar

Wiki User

โˆ™ 2011-03-08 19:08:57
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +5 pts
Q: How do you remove ignition lock key without key?
Write your answer...
Submit

Related Questions

How do you remove the key from the lock ignition?

1996 rodeo- how to remove key from lock ignition?


How do you remove the ignition lock cylinder on a 66 Chevelle without the key?

you don't, you need a key.


How do you remove a lock cylinder from a ignition swith without a key on a 1965 Chevy?

Without the key you are going to have to drill it out.


Why can you remove the ignition key from a 1998 Eclipse without turning off engine?

The key and the ignition lock are badly worn. Try a different key if it doesn't fix it you need to replace the ignition lock.


How do you remove the ignition lock barrel of a 1974 Nova without the key?

you need the key to get it out unless you a car thief.


How do you remove the ignition switch on a 1971 Chevy blazer without a key?

You would have to drill out the center of the lock or have a locksmith pick the lock.


How DO YOU program a 2008 Chevy uplander key fob?

1. Close the vehicle doors.2. Turn OFF the ignition.3. Remove the key from the ignition.4. Press and hold the driver side door lock switch in the UNLOCK position.5. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.)6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.)7. Insert the ignition key into the ignition lock cylinder. (Do not turn the ignition key in the lock cylinder.) Leave the ignition key in the ignition lock cylinder.8. Release the door lock switch. The vehicle will sound three beeps in order to verify the Program Mode has been activated.9. Press the LOCK and UNLOCK buttons together on the keyless entry transmitter and hold until the vehicle beeps twice to verify that the transmitter has been successfully programmed (this take approximately 15 seconds).10. Perform the previous step to program up to four transmitters (including your old ones).11. Remove the ignition key in order to exit the Program Mode


Can you remove the ignition switch on a 98 explorer without the key?

Not without picking it over or breaking it. The switch needs to be turned, and the retainer depressed to remove the lock cylinder.


What if your ignition key is stuck in the ignition how do you get it outa 93 Toyota?

There should be a lock on the ignition a push button that you push and turn to remove the key


What do you do if your key is stuck in the ignition of a 1999 Pontiac Gran Prix.The ignition will not turn to the lock position for me to remove the key?

is it a ford? push the key in further and then turn it


How do you remove ignition lock on a Chevelle with no keys?

You could try removing a door lock, bring to a locksmith to have key made - should be the same as ignition


How do you remove the ignition out of 1986ish postal jeep you have the key but it doesn't turn the lock?

use the right key


How can you remove an ignition lock on a 1985 Dodge Ram Pick up with no key?

Drill it out............


Why does your 2000 F250 start without the key?

The ignition lock seems to be broken.


What must you do when leaving a vehicle unattended?

Stop the engineLock the ignitionremove key from ignitionset parking brake


How do I get the dashboard ignition switch out to replace my lost ignition key on my 1979 ford bronco?

There is a lock ring on the inside of the dash where the switch connects. You need to remove this lock ring to remove the switch from the dash.


How do you take off a 2002 Ford Taurus ignition key lock cylinder without a key?

I don't think that's possible without the key.


How do you program the remote key fob on a 2005 Buick Rendezvous?

There's a manual method of programming keyless entry transmitters also. Make sure that you have all the transmitters you want to be able to use handy because the system will have to "learn" each one, even if they already worked before. If you have the memory seat/radio/mirror option you'll need to program the remote for 'There's a manual method of programming keyless entry transmitters also. Make sure that you have all the transmitters you want to be able to use handy because the system will have to "learn" each one, even if they already worked before. If you have the memory seat/radio/mirror option you'll need to program the remote for 'driver 1' first, then 'driver 2', then up to 2 others. Here's how to do it: 1. Close the vehicle doors. 2. Turn OFF the ignition. 3. Remove the ignition key from the ignition lock cylinder. 4. Press and hold the driver side door lock switch to the unlock position. 5. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.) 6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.) 7. Insert the ignition key into the ignition lock cylinder. (Do not turn the ignition key in the lock cylinder.) Leave the ignition key in the ignition lock cylinder. 8. Release the door lock switch. The body control module (BCM) will sound three beeps in order to verify the Program Mode has been activated. 9. Press the lock and unlock buttons on the keyless entry transmitter simultaneously for approximately 5 seconds . The BCM will sound two beeps in order to verify that the transmitter has been successfully programmed. 10. Perform the previous step to program up to four transmitters. 11. Remove the ignition key in order to exit the Program Mode. 12. Verify the proper operation of each transmitter.driver 1' first, then 'driver 2', then up to 2 others. Here's how to do it: 1. Close the vehicle doors. 2. Turn OFF the ignition. 3. Remove the ignition key from the ignition lock cylinder. 4. Press and hold the driver side door lock switch to the unlock position. 5. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.) 6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.) 7. Insert the ignition key into the ignition lock cylinder. (Do not turn the ignition key in the lock cylinder.) Leave the ignition key in the ignition lock cylinder. 8. Release the door lock switch. The body control module (BCM) will sound three beeps in order to verify the Program Mode has been activated. 9. Press the lock and unlock buttons on the keyless entry transmitter simultaneously for approximately 5 seconds . The BCM will sound two beeps in order to verify that the transmitter has been successfully programmed. 10. Perform the previous step to program up to four transmitters. 11. Remove the ignition key in order to exit the Program Mode. 12. Verify the proper operation of each transmitter.


Hoe to remove the ignition lock cylinder in a 99 cavalier?

Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder


How do you remove the Ignition Key Lock Cylinder to replace it on a 1976 Chevy Blazer?

this site will help


Can i remove key on a 1986 cutlass while ignition is still on?

If the lock cylinder is worn out....sure.


Remove ignition key cylinder on a 1998 sunfire GT?

Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder


How do you remove a 1997 cavalier ignition key cylinder?

Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disable the airbag system * Remove the tilt lever if equipped * Remove the upper and lower steering column covers Ignition Switch * Remove the ignition switch retaining screws * Detach the ignition switch from the steering column housing assembly and unplug the electrical connectors Key Lock Cylinder * Turn the key to the run postion * Depress the lock button and remove the key lock cylinder


How do you replace the ignition lock without the key?

Drill through the lock. There is a "gear" on the back of the lock. Try not to drill through it. After you drill through the lock you can use a screwdriver to turn that gear to the right position (RUN or ACC )depending on what kind of car you have. Then all you have to do is remove the steering wheel and mis. parts to get to a screw that holds the ignition switch in. Then remove the lock and install the new one.


You lost your keys On a 1987 Ford Ranger how can you remove the ignition to get a key made?

Either call a loclsmith or remove a door lock- may be easier access If you remove the ignition why not just put a new one in,it comes with a key