power steering pulley is pressed on. to remove pulley, u need to completely remove pump from vehicle and take it to a mechanic that has right tools for removing
This requires a power steering pulley puller. This puller is designed to remove and install a power steering pulley without damage to the pulley and or pump. Attempting to do this without the puller will result in damaging the pulley or the pump or both.
You need to rent, borrow or purchase a power steering pulley puller. This tool will remove and replace the pulley without damage to the pulley or the pump.
Begin by removing the power steering pump belt from your 1991 Cadillac power steering pump pulley. Remove the power steering pump pulley retaining bolt. The retaining bolt will be in the center of the pulley.
There is a special puller for removing the pulley. You can find it at your local parts store. Most have it as a loaner tool free of charge.
You will need a power steering pulley puller. It is designed to remove and install the power steering pulley. If you attempt to remove the pulley without it you will probably damage the pulley or the pump or both.
That is not a Allen screw in there. That is part of the pump shaft. If you are looking to remove the pump pulley you will need a power steering pulley puller. This tool will help you remove it and replace it, without the puller you will damage the pulley or the pump or both.
Start by removing the lines, drain the fluids, then remove the pump pulley. After that, remove the mounting bolts.
To get the pulley off requires a pulley puller to do it. You do not have to remove the PS pump to do it. It also takes a special tool to put the pulley back on too.
how to remove a power steering pulley on a 1997 Nissan altima
With a power steering pulley puller. Any attempt to remove the pulley without the proper tool will probably damage the pulley or the pump or both. Most auto parts stores will sell you the puller or rent you one.
The power steering pulley requires a special puller to remove and install the pulley. Many auto parts stores will sell or rent you the proper tool. Any attempt to remove the pulley without the special tools will probably damage the pulley and or the pump.
That requires the use of a power steering pulley PULLER. ( A special tool ) The pulley is pressed on.
Yes you do.
Take off the sockets and remove the pump pulley.
You will need to buy or rent or borrow a power steering pulley puller. Trying to remove and replace the pulley without the correct puller will surely damage the pulley and or the pump.
To remove that pulley with out damaging the pump or the pulley you need a power steering pulley puller. This tool will also install the pulley. Your local auto parts store can rent or sell you that puller.
To remove the power steering pump, you will have to disconnect the air control valve hoses( two of them buttom of pump) then the retun hose. then the high presure hose. the pulley well have to be removed before you can remove the pump. the way to remove the pulley is by removing a nut that holds the pulley in place. then to frace the pulley off the pump use a ball joint separater tool between the pump and the pulley and hammer it until the pulley slides off. then unblot it form the bracket.
With a special tool called a power steering pulley remover.The same tool will also install the pulley without damage to the pump or pulley.You need a special puller, depending on what make/brand/type.
Pulley is pressed onto pump, you need a puller to remove.
That requires a special PULLER to remove the pulley.
That requires a special PULLER. Need a power steering pulley Puller.
The crankshaft pulley on a PT Cruiser bolts on. After removing the vehicle belt and pulley bolt, use a pulley puller to break the pulley loose and remove it.
You can rent or purchase the tool to properly remove and replace the power steering pulley from your local auto parts store. Without the proper tool you will damage the pulley or the pump or both.