0
There are two small holes in the butt pad of the stock. Lubricate a Phillips head screwdriver into the holes and remove the butt pad. Using a long flathead screwdriver remove the screw in the center of the stock. To add new stock simply reverse.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you remove the bolt from Remington 722?
The Remington 700 series of rifles have a couple of ways to remove the bolt. If you DON'T have a release just in front of the trigger that you must push up when drawing the bolt rearward, then you need to insert a small, thin blade screwdriver into the left rear of the stock between the receiver and the back of the stock to activate (push forward) the bolt stop. While doing that, pull the bolt backward and it will come out of the receiver.
Will a stock from a Remington 870 fit a Remington model 11?
No, the re4ar receiver face on the Model 11 Remington has a different configuration. The Remington Model 11 is a semi-auto with a tube containing a bolt return spring located at the rear of the receiver. The Model 11 stock has a receptacle to accept this tube, the Model 870, being a pump action, does not have this receptacle.
Where is the serial number located on a ruger red label 20 gauge shotgun?
Remove the forend, then the barrel. The serial number will be on the underneith side of the bottom barrel at the point where it hinges with the rear stock. You may need a magnifying glass.
How do you remove the bolt on a mossberg 185 D shotgun?
You have to press and hold the trigger to the rear and the bolt will slide out the back.
How do you remove the bolt from a Remington model 721 rifle?
Actuate the bolt to the rear and there is a tang in front of the trigger that hangs down..Press up on this tang and pull the bolt back and it will remove it from the action.
How do you remove the stock from a 30-30 Glenfield Model 30 lever action?
Remove the large screw visible in the top tang behind the hammer. Bump the stock off to the rear using the heel of your hand against the comb of the stock. sales@countrygunsmith.net
What is the rear sight on the shotgun?
Your eye is the rear sight.
What is the age Remington 1100 serial number 495736V?
IF your shotgun has the original barrel, it can be dated ffrom the 2 or 3 letter code stamped on the left rear side of the barrel. The website for the Remington Collector's Association has a chart showing relation of the letter code to month and year of production.
How to you remove the old stock rear spearkers in a 1996 Chevrolet Corsica?
the rear speakers can be removed by getting a 5/16 inch socket and loosen the bolts holding them in
How do you remove front sight blade on Remington 742 rifle?
1. Remove the screw to the rear of the front sight ramp.2. Remove the "blade" from the front sight ramp.3. Remove the screw from the front of the front sight ramp (which was formerly seated under the "blade").
What is the the rear sight of a shotgun called?
bead
How do you remove the front ramp site on a 760 Remington rifle?
There are two screws securing the ramp to the barrel. One screw is quite obvious at the rear of the ramp. The other screw is under the front sight blade. Remove the front sight blade and you will be able to remove the mounting screw.
