0
How do you remove shift knob on a 1999 olds intrigue will anything fall apart .how do you install the stapple like pin?
Wiki User
∙ 15y ago
To remove the shift knob on the 1999 Olds Intrigue look for the pin that is holding the knob in place. Remove the pin and pull up on the knob, replace kob and pin.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you change a heater core in an 98 intrigue?
You will need to remove the water supply hoses from your 1998 Oldsmobile Intrigue heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
How do you install fuel pump on 1999 Oldsmobile intrigue?
You must remove the fuel tank in order to access the fuel pump.
How do you replace the wheel bearing on a 2000 Oldsmobile Intrigue?
remove the hub then remove the locking ringon inside of hub press hub and baring out then press hub out of inner baring surface reverse procedure to install.
How to replace the AC control head in my Oldsmobile Intrigue?
Pull the plastic trim that surrounds the radio and center stack, remove the screws that hold it in, pull it out and unplug it. Reverse to install.
How do you replace the throttle position sensor in a 98 Olds intrigue?
The 1998 Oldsmobile Intrigue throttle position sensor is held in place with two retaining screws. Remove the retaining screws and the wiring harness. Reverse the process to install the new throttle position sensor.
How do you remove high pressure power steering hose 2000 odlsmobile intrigue?
How do you remove high pressure power steering hose 2000 odlsmobile intrigue
How do you install headlights on 1999 olds intrigue?
There are 2 slide locks behind the assembly holding the entire unit in. Pull them up and remove the unit out enough to replace the bulbs or the unit.
How to replace blower resistor in 2002 olds intrigue?
A blower resistor can be replaced, in your 2002 Oldsmobile, by removing the resistor wiring. Remove the retaining screws. Reverse the process to install the new resistor.
How do you drain the radiator in a 1998 Oldsmobile intrigue?
Remove the lower radiator hose.
How do you remove a windshield wiper motor on a 1999 Oldsmobile intrigue?
Take it out with your muscle.
The cup holder in my 1998 Oldsmobile Intrigue has come off of its tracks and has fallen into the armrest and is stuck there. How can I fix the armrest cupholder in my Oldsmobile Intrigue?
Remove (or have a professional remove) the center console. The cup holder may or may not be repairable.
How do you change brake rotors for 1999 olds intrigue?
Remove the wheels of the affected rotors. Remove the calipers and hang from a bungee or other strap to prevent stress on the brake hoses. Remove the caliper brackets. Remove the rotors. Clean the rust from the hub flange. Clean the anti-rust from the new rotors. Install the new rotors. Install the brackets. Install the new pads (if you are using new pads). Compress the caliper piston, one side at a time, using a c clamp or actual piston tool. Install the calipers. Install the wheels. MAKE SURE YOU PUMP UP THE PEDAL BEFORE YOU PUT THE CAR IN GEAR. Many people have taken out walls for forgetting this step.
