Most cars have an inside cover over the bolts that hold the mirror on. I would expect a 97 Accent to be the same. Most just pop on, some have a screw in one corner.
It varys from each car but I think you have to take off the door panel. Next you locate the bolts and remove from there.
The horn on a 1997 Hyundai accent is located behind the front bumper. It is placed on the passenger side of the vehicle behind the right headlight.
If you want to remove the clear downward ground light on the mirrors. You have to pry out the clear lens.
* Remove the door trim panel * On power mirrors unplug the electrical connector * Remove the triangular cover over the mirror mounting * Remove the bolts and detach the mirror from the door * Installation is the reverse of removal
On the bottom of the door mount is a screw. Remove it, and push the case up. There's four 5/16 bolts. If it's power mirrors, there's a wiring harness inside the door you'll have to disconnect.
Remove the inside door panel. Remove the wiring harness. Remove the mirror retaining bolts. The side rear view mirror will come off.
To remove the mirrors from you Nissan Sentra first remove the inside door panel. Pry the plastic mirror cover off of the mirror. Once this is done remove all of the nuts, bolts, or clips holding the mirror to the door.
Side view mirrors.
if they are electric mirrors the front glass pannel will just pop off and then the screws can be reached
On passenger front side, beneath glove compartment
the mirrors have plastic shields on the stalks, pry them lightly with a flat head screw driver, youll see 2 Phillips head bolts, remove them then the mirrors are free.
Go to the following website. It's for removing the side mirrors, but it shows how to remove the door panel. kwmuth.com Awesome suggestion--it helped out right away. Read the details and look for the arrows! http://kwmuth.com/techsupport/pdfs/21000040.pdf
Curved mirrors are mirrors that have a spherical side. example - concave and convex.
on the driver side. inside the corner front bumper on the driver side. easier to get to if you take out the turning light.
Magnifying mirrors, side mirrors on cars and trucks, certain securuty mirrors.
Where is the fuse for 2004 Ford Falcon XR8 side mirrors
Side mirrors on Jeep Wranglers are manually adjusted.
Yes is does matter if you have no side mirrors on your jeep wrangler. It illegal to not have side mirrors on a vehicle that you drive on the road.
Remove the front door sail panel. There you will see 3 bolts holding the side view mirror. Remove bolts, replace / or fix side view mirror. remove the wire hardness. Installation is the reverse of removal.
It is held in place by two screws, remove them, pull the handle towards you and that should do it.
Follow this URL http://www.muthco.com/techsupport/pdfs/21000790.pdf
To remove the drivers side window and regulator, you will need to remove the door panel from the door. Then you can unbolt the regulator and window to remove them.
in refference to the exterior tow mirrors. i would like to swap side to relocate the spot mirrors, so I need to remove the "mirror face".
Rear view mirrors & Side mirrors.
very easy,just remove the little coveer inside the care that is by the side glass,then you see three or two bolts ,remove and unplug if power and reverse the step.