What should you use to clean your deck with?

Answer 1

To remove stains from your deck start by giving it a good washing. Sweep up all loose debris and dirt then give it a scrub with a mild detergent and water solution. Make sure not to use a harsh chemical that could warp the wood. It will take a good amount of scrubbing with a stiff bristled brush but most stains should easily come out.

Answer 2

Usually, a wash down with the garden hose is all a deck needs to be cleaned, but sometimes stains are so tough that a pressure washer is needed. A pressure washer can be rented from a home furnishing or hardware store. The homeowner should wear goggles and rubber gloves when using it, and if a bleach or very strong cleaner has to be used, the shrubs and plants around the deck should be covered with plastic drop cloths to protect them. The cleaning should begin in the middle of the deck and work outward, and the sprayer head should be from four to six inches from the surface of the deck.

Answer 3

You can try paint remover or paint the desk color over it.

Answer 4

bleach,oxi bleach,vinegar,pressure washer,clorox,oxy clean

Answer 5

For even pressure washing of your deck, it is recommended to use a Pressure Washer Surface Cleaner Attachment. A Pressure Washer Surface Cleaner is a pressure washer attachment from Bestcargurus that spreads the water pressure using twin rotating outlets allowing you to get an even clean for large areas! It does not only promote even cleaning, but it also enables you to do jobs up to 4x faster than the usual spray nozzles.

Once the pressure washer surface cleaner has been attached to your pressure washer, simply hover it over your deck on a consistent vertical pattern. If you find a spot with a lot of dirt, use multiple sweeps to clean it. Pressure wash your deck once every two or three years, and at most once a year. Washing it too often will contribute to erosion, whereas not doing it often enough will allow dirt and algae to build up.