Chances are you don't need to if its what is wrong with every metro you just need to break the child safety lock inside the door. take off the panel on the inside of the door then look inside follow the bar away from the handle to where it latches to the frame you should be able to see whats in the way of the door unlocking. use a long piece of metal or something that will help you reach and push the plastic child safety lock out of the way. (i had to break it couldn't move it so don't be afraid to break it. the door will still work the child safety lock wont.) once you've done that you should be able to unlock the door and open it. PS: youre trunks not gonna work soon either.
underneath the steering wheel there is a cover remove it and there is your fuse panel. it is a tight fit though
take it off
Remove the screws in the door panel.
just give it a quick tug, it will come out
The only way is to remove the inside door panel (not an easy job with the door closed). Once the panel is removed, you'll have access to the latch mechanism. You will be having to remove this panel to put a new door handle on anyway.
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
What one of the 16 trim panels I can think of on the Metro And what year, Because it matters!
Chevy Tahoe remove front and rear speaker
Using a screw driver remove the screws from the door panel, remove the clips, and pull the panel away from the frame slowly. Remove any wiring connectors, and remove the panel the rest of the way.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
You have to remove the inside panel, where the window crank is, or would be.
The process for removing the door panel can be found at: http://www.bodyshopzone.com/archives/trim/door_panels/Chevy/Equinox_2005/dp_front_rear.html
Removing the front door panel can be tricky. Remove the screws in the armrest, remove the bracket pin the wood trim, remove the armrest, remove the leather strip, disconnect any wires, remove the brackets and screws in the door panel and pull gently on the panel to remove it.
Using a screwdriver, remove the screws that are in the door panel, be sure to remove the clips as well, and gently pull the panel away from the frame. Remove any wire connectors between the frame and the panel, and pull the panel off the rest of the way.
Using a screwdriver remove the screws and all of the clips in the door panel, and pull the panel away from the frame gently. Remove any wiring connectors, and pull the panel off the door frame.
The best way to do this is to have a professional look at it. You will need to have the right tools to take it apart.
Using a screwdriver, remove the screws and the clips from the cars door panel. Pull the panel away from the frame, remove the wiring connections, and the panel will come free.
use your mom
Removing a 1991 Chevrolet Silverado door panel is pretty simple. All you will need to do is to remove the screws holding the door panel in place.
Remove the interior window crank and the concave plate behind the inside door handle. Then lift and pull out on the entire door panel, which is held in place by plastic clips. This exposes the screws holding the speakers in place.
i think you should remove the door first then remove the door panel by hitting it with a soft hammer to release it.
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.