Under the glove box on the passenger side.
Begin by removing the wiring harness from your 2002 Montero blower motor. Remove the blower motor retaining bolts. Remove the fan from the front of the blower motor. Reverse the process to install your new blower motor.
Remove the wiring harness to the heater blower fan. Remove the retaining bolts. Remove the fan from the blower. Reverse the process to install the new heater blower fan.
It is under passenger side dash behind the blower motor.You must remove blower motor to access it.
Hi, The blower fan is under the dash on the right side sort of behind and a little to the left of the glove compartment. Steve H.
# Disconnect negative battery cable wait 2 minutes for airbag to disarm # Disconnect the electrical connector to the blower motor and remove the three screws retaining the blower to the housing # Pull the blower motor and fan straight out being careful not to bend the fan # To remove the fan from blower motor squeeze the spring clip together and slip the fan off the shaft
how do i remove the fan/blower motor on a 2001 Honda Accord LX?
Remove the wiring harness from the back of the blower motor in your 1993 GMC 1500. Remove the blower motor retaining bolts. If the new blower motor does not have the fan attached to and you will need to remove the fan from the old blower motor. Reverse the process to install the new blower motor.
Remove the blower motor retaining nuts. Remove the wiring harness from the back of the blower motor. Remove the fan from the blower motor. Reverse the process to install the new blower motor.
Remove the wiring harness from the back of your 2005 Chevy Cavalier heater blower motor. Remove the heater blower motor retaining bolts. Remove the heater blower fan.
the blower fan resistor is located in behind the glove compartment to the left of the blower motor. you have to remove glove compartment to get at resistor.
Remove the wiring harness from the back of the blower motor. Remove the blower motor retaining screws. Remove the fan from the blower motor. Reverse the process to install the new blower motor.
Remove the wiring harness from the back of your 2001 Chevrolet Corvette blower motor. Remove the blower motor retaining bolts. Remove the blower motor fan. Reverse the process to install the new blower motor.