Open the hatch-back, the tail light assembly which is red, has two Phillips head sheet-metal screws, one on top and one on the bottom. Remove these two screws and then use slight pressure or a flat-head screw-driver to pry the assembly loose. Be careful not to crack the assembly. The tail-light assembly will have three different caps that have wires leading to them. The one in the middle is the brake light, slightly turn the assembly to the left or right and it should dis-engage, push the bulb down and turn, the bulb should come out. Replace the bulb and use the same procedure in reverse to re-assemble the fixture.
You can access the brake light assembly from the cargo compartment of your 1998 Dodge Neon. Remove the wiring harness from the back of the brake light. Remove the brake light retaining bolts. The brake light will come out. Reverse the process to install your new brake light.
You will need to remove the 1998 Chevy Camaro brake light wiring harness. Remove the brake light retaining screws. Reverse the process to install the new brake light.
The center brake light replacement will require replacing the entire brake light assembly. Remove the wiring harness. Remove the center brake light retaining screws. Reverse the process to install the new center brake light.
The 1998 Nissan center brake light is a sealed unit. The entire brake light unit will need to be replaced. Remove the wiring harness. Remove the brake light retaining screws. Reverse the process to install the new brake light unit.
how do you remove the brake light cover on a 1991 gmc tracker? Do you go from the outside or inside?
How do you remove the brake light cover on a ford focus
with a hammer
You can access the middle brake light from the inside of your 2000 Dodge Neon cargo compartment. Remove the brake light wiring harness. Remove the brake light retaining bolts. Reverse the process to install the new brake light.
Remove the wiring harness from the high mount brake light. Remove the back cover of the brake light assembly. Take hold of the brake light connector, push in and turn at the same time. Reverse the process to install the new brake light.
How do you remove cover to replace brake light on 57 kia Rio
You can remove the ABS and brake light, from your Oldsmobile Alero, by removing the dash cover. The light retaining nut must be removed. The light will come out.
Remove the high mount brake light retaining screws from your Mazda Protg. Remove the high mount brake light wiring harness. Reverse the process to install your new high-mount brake light.