there should be four bolts on the back of the calipers two of them should hold the pads and the other should hold the caliper remove the pad holder first and then the caliper.
Windshield wipers not turning off is not a common problem in the 1997 Jeep Wrangler. Remove the windshield wiper fuse to turn them off.
What year of Wrangler is it? On the YJ's you unhook the door strap and unscrew one bolt on the bottom of the hinge and it should lift right off.
I think the hum V Jeep used by the army is the best off road jeep
remove the battery btw, your mom.
1995-2006 will interchange.2007-2012 will interchange
jack up the tire and then remove the bolts that is holding the calipers and then remove the hose and the calipers will come off. you will need to bleed the brakes when you replace everything back together.
Remove wheels Remove caliper mounting bolts (2) Slide caliper off rotor (support so brake line is not stressed Rotor should slide off
think you take the plastic covering off and undo the wires and unbolt it
Jeep does not use reset or shut off switches.
no no no you do not need to remove your castle nut if the rotor will not come off you need to beat it tell it dose
I do'nt want to just pull the fuse so what is the best way to keep my dome lights "off" when i take the doors off my 2004 Jeep Wrangler X
1. Take the tire off 2. Take the brake calipers off. (there are 2 bolts on the back side of the calipers) then you can remove the calipers and rotors.
Replacing the calipers are pretty simple. just take the wheel off and its right there. Two bolts and its off. Calipers are not something that usually has a problem.
Jeep Wrangler wheel lug patterns years 1987-2006 are 5X4.5Jeep Wrangler wheel lug patterns years 2007-2014 are 5X5
89 Jeep Wrangler Flooding and popping through the Carborator once the engine is turned off?
The 1994 Jeep Wrangler dash pad is secured with eight retaining clips. Pry outward on each retaining clip and the dash pad will come off.
remove th front wheel, undo the 2 bolts on calipers and bushings,thenlift calipers off. HINT: if calipers seem to stick then get a large flat bladed screwdriver and wedge it between rotor and caliper and apply just enough force to back off pistons in calipers to remove them then they will slide off.
Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotor and support so flexible brake line is not stressed Rotor should slide off
A Jeep Wrangler is a compact and mid-size four-wheel drive off-road and sport utility vehicle. The firing order of a 2007 Jeep Wrangler is 1-5-3-6-2-4.
Key on, off, on, off, on.
remove wheels thenremove calipers the rotors are on the studs with small keeper washers just pry them off
No, a 1997 Jeep does not have an inertia or reset switch.
Jeep does not use inertia/reset switches.