answersLogoWhite

0


Best Answer

You'll need a puller you should be ablt to get a lon from on of you autoparts suppliers

without this you will not be able to remove it

Jim.

User Avatar

Wiki User

โˆ™ 2015-07-15 20:49:50
This answer is:
User Avatar
Study guides

Add your answer:

Earn +20 pts
Q: How do you remove the crank pulley on a '96 Dodge Intrepid 3.5L to change the timing belt?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Do you have to remove the dampener pulley to change the timing belt on a 1994 Chrysler new yorker?

Yes.


How do you change the timing belt on a 1996 Hyundai Elantra?

disconnect negative battery cable rotate the engine in the normal direction of rotation(clockwise)until the no.1 is TDC remove the accessory drivebelt loosen the water pump pulley bolts and then remove the water pump pulley using a chain wrench or a strap wrench to hold the crankshaft pulley,loosen the crank pulley bolt and then remove the pulley bolt and the crank pulley.Make sure that you dont move the No.1 cylinder from TDC while loosening the crank pulley bolt.After removing the crankshaft pulley remove the timing belt retainer/guide flange remove the 4 upper timing belt cover bolts and then remove the upper timing belt cover.Remove the lower timing belt cover bolts make sure that the timing belt camshaft sprocket timing marks are aligned with the top of the cylinder head if your planning to re-use the timing belt put a directional arrow indicating the normal clockwise direction of rotation on the belt remove the timing belt tensioner pulley bolt and then remove the tensioner pulley remove the timing belt remove the timing belt idler pulley bolt and then remove the idler pulley if the camshaft sprocket is damaged or must be removed to replace the camshaft seal or to strip the cylinder head for overhaul use a wrench to hold the cramshaft in place and then remove the sprocket retaining bolt.Then remove the camshaft sprocket from the end of the camshaft remove the crankshaft tioming belt sprocket


How do you change a timing belt on a 1997 Hyundai Elantra?

CAUTION: Some models are equipped with anti-theft-radio make sure you have the activation code before disconnecting battery * Disconnect the negative battery cable * Rotate the engine in the normal direction of rotation (clockwise) until the No.1 cylinder is located TDC * Remove the accessory drivebelt * Loosen the water pump pulley bolts and then remove the water pump pulley * Using a chain wrench or a strap wrench to hold the crankshaft pulley loosen the crank pulley bolt and then remove the pulley bolt and the crank pulley.Make sure that you dont move the no.1 cylinder from TDC while loosening the crank pulley bolt.After removing the crankshaft pulley remove the timing belt retainer/guide flange * Remove the four upper timing belt cover bolts and then remove the upper timing belt cover.Remove the lower timing belt cover bolts * Make sure that the timing belt camshaft sprocket timing marks are aligned with the top cylinder head * Remove the timing belt tensioner pulley bolt and then remove the tensioner pulley * Remove the timing belt


How do you change timing belt on 96 elantra?

CAUTION: Some models are equipped with anti-theft-radio make sure you have the activation code before disconnecting battery * Disconnect the negative battery cable * Rotate the engine in the normal direction of rotation (clockwise) until the No.1 cylinder is located TDC * Remove the accessory drivebelt * Loosen the water pump pulley bolts and then remove the water pump pulley * Using a chain wrench or a strap wrench to hold the crankshaft pulley loosen the crank pulley bolt and then remove the pulley bolt and the crank pulley.Make sure that you dont move the no.1 cylinder from TDC while loosening the crank pulley bolt.After removing the crankshaft pulley remove the timing belt retainer/guide flange * Remove the four upper timing belt cover bolts and then remove the upper timing belt cover.Remove the lower timing belt cover bolts * Make sure that the timing belt camshaft sprocket timing marks are aligned with the top cylinder head * Remove the timing belt tensioner pulley bolt and then remove the tensioner pulley * Remove the timing belt


What is the pulley for your timing belt directly behind the crank shaft called on a 1997 Dodge Intrepid 3.5L V6?

Timing belt crank sprocket


What type of pulley extractor do you use to remove the pulley from the front of the timing belt cover?

uj


How do you change the timing belt on a 2001 elantra?

1.Disconnect the negative battery cable 2.Rotate the engine in the normal direction of rotation (clockwise)until the no.1 cylinderis located at TDC 3.Remove the accessory drivebelts 4.Loosen the water pump pulley 5.Using a chain wrench or a strap wrench to hold the crankshaft pulley,loosen the crank pulley bolt and then remove the pulley bolt and the crank pulley.Make sure that you dont move the no.1 cylinder from TDC while loosening the crank pulley bolt.After removing the crankshaft pulley,remove the timing belt retainer/guide flange 6.Remove the four upper timing belt cover bolts and then remove the upper timing belt cover.Remove the lower timing belt cover bolts 7.Make sure that the timing belt camshaft sprocket timing marks are aligned with the top of the cylinder head. 8.Remove the timing belt tensioner pulley bolt and then remove the tensioner pulley 9.Remover the timing belt


How do you change a vauxhall corsa timing chain?

To change a Vauxhall Corsa timing change you need to first remove the rocker cover, the alternator tensioner, heat shield, water pump, engine mount, and crankshaft pulley. Now that you have found the timing change, unscrew the timing chain guides, remove old chain, and replace with new chain.


What is the Location of water pump on 97 intrepid?

Your water pump is located behind your serpentine belts, where your timing cluster is, the best way to access it will be to loosen your radiator and pull it forward, remove both serpentine belts, and dismount the tensioner pulley under your alternator, and after you remove all the cover shields to your timing cluster, your water pump is the pulley in the center. If you are over 120,000 miles it would be smart to change your timing belt and your tensioner pulley as well. Be sure to have a tight seal on your new water pump because it's a real hassle to keep going in there.


Change timing belt on 1999 elantra?

disconnect negative battery cable rotate the engine in the normal direction of rotation(clockwise)until the no.1 is TDC remove the accessory drivebelt, then put a jack under the engine to support it and remove the engine mount so itllbe out of the way, then loosen the water pump pulley bolts and then remove the water pump pulley using a chain wrench or a strap wrench to hold the crankshaft pulley,loosen the crank pulley bolt and then remove the pulley bolt and the crank pulley.Make sure that you dont move the No.1 cylinder from TDC while loosening the crank pulley bolt.After removing the crankshaft pulley remove the timing belt retainer/guide flange remove the 4 upper timing belt cover bolts and then remove the upper timing belt cover.Remove the lower timing belt cover bolts make sure that the timing belt camshaft sprocket timing marks are aligned with the top of the cylinder head if your planning to re-use the timing belt put a directional arrow indicating the normal clockwise direction of rotation on the belt remove the timing belt tensioner pulley bolt and then remove the tensioner pulley remove the timing belt remove the timing belt idler pulley bolt and then remove the idler pulley if the camshaft sprocket is damaged or must be removed to replace the camshaft seal or to strip the cylinder head for overhaul use a wrench to hold the cramshaft in place and then remove the sprocket retaining bolt.Then remove the camshaft sprocket from the end of the camshaft remove the crankshaft tioming belt sprocket


How do you change a timing belt on a 1986 Chevy Nova?

You must remove the crankshaft pulley (19mm socket) and then the timing cover but it appears to need the engine jacked up, to remove the front to frame mount to get the new belt in.


Do you have to remove the timing belt to take off a water pump for a 2000 Dodge Intrepid?

yes sorry

People also asked