Heater Cores and Blower Fans
Chevy Blazer S-10
Ford F-150

How do you remove the dash of a 1998 Ford F150 to replace the heater core?

242526

Top Answer
User Avatar
Wiki User
Answered
2010-01-11 02:02:45
2010-01-11 02:02:45

you should be able to get at heater core just by removing glove box.no need to remove all the dash

Is there any instructions on how to do this?

001
๐Ÿ˜‚
0
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Related Questions


How do I replace the block heater in my 1998 F150 4.6L?


There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system.




There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system. There is no short cut or fast way to do this. The dash has to come out to access the heater box and replace the core. So the steps in replacing the heater core are to disconnect the heater hoses, remove the dash, to access the heater core cover on the front of the heater case and replace the core. Reassembly is in the reverse order as disassembly. Fill the cooling system with new coolant, and burp the air form the cooling system.


How do you remove and replace the battery on a 2001 Ford F150?



I have done it a few times, to custom paint my dash. I forgot how, but I suggest looking at fordtruckworld.com. Many people have asked the same question, and gotten MANY responses. That's where I learned how the first time!


remove glove box. remove platic cover behind glove box under hood remove both heater hoses at firewall under dash remove retaining screws on heater core remove heater core reinstall is exact opposite of removal


Look up under the passenger's side dash close to the kick panel, and you will see a heater case. there on the front is a removable cover, held on with several 7mm screws. Remove that cover, disconnect the heater hoses under the hood, and replace the core. Reassembly is in reverse order of removal.


To replace a windshield wiper motor for a 1998 F150, first remove the bottom trim on the window. Then remove both wiper blade assemblies and all screws on the metal cowling. Remove the retaining clip from the wiper motor linkage and pull the controls rods off.


Look up under the passenger's side dash close to the kick panel, and you will see a heater case. there on the front is a removable cover, held on with several 7mm screws. Remove that cover, disconnect the heater hoses under the hood, and replace the core. Reassembly is in reverse order of removal.


you must first remove the glove box,then you will be able to get at the screws that hold the box in place


to replace a heater core in f150, lift hood and remove both coolant hoses near firewall then inside truck, remove ashtray this will enable you to get at a screw that holds glove box in dash remove glovebox then behind glovebox is a black plastic panel remove screw holding this panel remove panel, you will then see the heatewr core remove screws holding heater core remove heater cre istallation of new core is exact opposite to removal of old core when all reassembled, check coolant level, as you may have lost some during replacement of core


how to replace oil pan gasket on 2007 f150 5.4 trition



To change the heater core in a 87 ford f150 is easy. Just remove the glove box and then behind it there is 7 bolts. After you remove the 7 bolts then just remove the cover and behind it is the heater core. By far the easiest heater core I ever changed.


Remove the calipers, then the caliper frame, rotor is now free.


The arm rest can be removed from the seat on a 1998 F150 by locating the bolts holding it on. Remove the bolts with the proper tool and life the armrest from the seat carefully.


you remove plastic red/white cover with 2 screws and remove bulbs.


The heater flap, or blend door, is difficult to replace with OEM parts supplied from Ford. There is an aftermarket kit that makes the job and cost significantly easier at heatertreater.net or on the Ebay listing.


insisde tuck three nuts and wiring harness.


You may have to remove your AC unit to get to it to replace it. Looks to be under and to the right of the water pump and about t 11 O'clock from the crank pully


I had to replace mine after it broke. All I did was remove the OLD stub with a crescent wrench and replace it. It took about 1 minute. That is all you have to do.


Remove wireUnscrew old one and replace



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.