first pop off the panel that has all your power windows and locks on it. behind it you will find a Phillips head screw. take that out. also remove all the wires going to the switch panel. there are 3 all together (if you have power locks windows and mirros) and there all pretty easy to get off. next take the screw off behind the door handle. this is also a Phillips head, but its smaller. ok if you see your "oh sh*t" handle there is a hole that goes into it towards the bottom of the handle. its the same type of screw that was behind the electric panel. Last thing to do is take a small flathead, and pop out the reflector at the end of the panel. be careful with this, as its very easy to break. the last screw is behind that, and its the same size as the other 2. Now, if you run your hand under the bottom of the panel, you'll feel a notch cut out of it. grab it, and give the panel a good yank. it should come off. if not try to be sure you have all the screws out, and find where the pressure is stopping, and you may have missed one of the steps above. When you put it back on do so carefully. Be sure to line the white plastic tabs up with there holes, other wise they will break and the panel might rattle. once you get them all lined up, hit the panel all around the clips a couple of times. then put the screws and electric in and your good to go.
Good Luck !!
National Auto Part
In order to replace the electric window motors on a Pontiac Grand Prix you will need to unscrew the Torx screws on the door, life it back to remove the plastic pieces. Remove all connectors, and the plastic covers.
the flasher is located in the steering coloumn. you have to remove the kick panels on the drivers side to get at it
How do you remove the drivers door panel and fix the window. It fell off the track.
If it looks the same it will probably work.
i just want to know how to remove the flywheel on a 1007 Grand AM Pontiac
how to remove a engine in a 1999 Pontiac grand prix 3.8L
Remove the front tires, from your Pontiac Grand Prix. Remove the brakes and rotors. Unbolt the axle from the suspension. Remove the axle.
You need to get a window crank removal tool from an auto parts store. Simple pressed steel tool for less and $5.
At the Pontiac dealership or eBay just type in Pontiac sash
how to replace1994 grand drivers side power window motor
with a window crank removal tool.
Bottom front drivers size
You will need to compress the 2002 Pontiac Grand Am strut spring with a spring compressor. Remove the top and bottom strut retaining bolts. Reverse the process to install the new strut.
how do you remove the back seat in the 2003 poniac grand am
1999 Pontiac grand pre how do I bypass driver window so I can get it up.
In the fuse panel located in the drivers side. Too bad this won't fix your window regulator problem which you're having.
change the window regulator
Remove the door panel, then remove the plastic sheeting. Then you can gai access to the window tracking. Remove the two 10mm nuts, that hold the window glass to the upper track. Remove the glass from the door, and install the new one in the reverse procedure.
Realigning a window on a 2001 Pontiac Grand Prix requires the door panel to be removed. After the panel is off the window can easily be put back on track.
Try this link, http://www.a1electric.com/grandam.htm. It shows how to replace the entire window regulator assembly (which includes the motor). Probably the cleanest description I have found.
There are a couple of different reasons as to why there would be power window failure in a 1998 Pontiac Grand Prix. One reason could be a faulty fuse or it could also be a short in the window motor.
just remove it
Remove the tire and wheel from your 2002 Pontiac Grand Prix. Remove the spring from the brake shoe. Remove the brake shoes. Reverse the process to install the new brakes.
It is on the bottom of the radiator on the drivers side.