answersLogoWhite

0


Best Answer

You need 3/8 hex head to unbolt the door and you need to pop off the top of the black unit in the door jam. there's a bolt. just unbolt that and the wiring is unattached.

User Avatar

Wiki User

โˆ™ 2015-07-15 21:03:06
This answer is:
User Avatar
Study guides

Add your answer:

Earn +20 pts
Q: How do you remove the driver's door and wiring on a 1998 Sable?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the horn relay on a 1998 Mercury Sable?

The horn relay for a 1998 Sable is on the back of the distribution block. The block is under the dash on the drivers side.


Where is th transaxle case in 1998 Mercury Sable?

In a 1998 Mercury Sable : The transaxle is the transmission on your front wheel drive Mercury Sable it is located in the engine compartment , on the drivers side , bolted to the engine


Where is the trasmision in 1998 mercury sable?

The transmission ( or in the case of your front wheel drive 1998 Mercury Sable , the " transaxle " ) is located in the engine compartment , on the drivers side , bolted to the engine


1 have a 1998 mercury sable LS that will not change out of first gear and the instrument cluster is malfunctioning?

Check fuses Check wiring harness at transmission for corrosion or loose wiring


Where is the fuse box on 1998 Mercury Sable?

On a 1998 Mercury Sable : The fuse box is under the drivers side of the dash , to the left of the brake pedal ( it has a cover on it ) Also , the Power Distribution Box ( which is " live " ) is located in the front of the engine compartment , near the battery


What is the tire size for a 1998 mercury sable?

Open the drivers door and look at the latch pillar , there will be a sticker showing the tire size on the vehicle from the factory


How do you replace a horn in a 1998 Sable?

1999 mercury sable horn replacement


How do you remove the door on a 1998 ford explorer?

disconnect wiring harness, mark hinges, remove bolts securing hinges to body.


How do you remove a 1998 Nissan Sentra transmission?

To remove a 1998 Nissan Sentra Transmission, you first need to locate all of the bolts. From there, you will remove the bolts. Undo any wiring or tubing that goes into the transmission. From there, it can be taken out.


What is the tire size for a 1998 Mercury Sable station wagon?

Original Equipment Tire is 205/65-15 which should be listed on the drivers door post.


How do you replace the alternator on a 1998 Buick LeSabre?

Disconnect the 98 LeSabre battery. Remove the alternator belt. Remove the alternator wiring. unbolt the alternator, remove it, and bolt the new one on. Reconnect the wiring, but the belt on, then reconnect the battery.


How to Remove a 1998 BMW z3 ignition switch?

Begin by removing the retaining ring at the top of your 1998 BMW ignition switch. The ignition switch will slide out. Remove the wiring harness.

People also asked