Remove the bolts and screws. The clips in the middle and top of the panel come out straight(screw driver from behind) do not do this at the bottom of the panel because they lift up and if you pry them straight out you will break them. The door lock assembly needs to be popped out from behind. Be careful not to destroy it. It takes a little persuasion. Most of the work on the door can be done by just laying the panel to the side. If you need to take it off the switches need to be unsnapped. The snap is very easy to break and is hidden.
Using a screwdriver, a person needs to remove the screws and then the clips in the panel. Then they need to pull the panel off slowly, and remove the wiring connections and the panel will come free.
remove panel directly under the steering wheel. Its a 1.5'' cylinder.
its on the drivers side of the engine at the back of the block
The 1994 Chevrolet Camaro power window relay switch can be found inside of the driver side door. You will need to remove the door panel to access the power window relay switch.
Yes- F body car. Sharing parts from 1993-2002.
Remove the inside door panel of your 1994 Chevy Lumina. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
It has no Governor. Speed is computer controlled.
Usually on fords they are in either the drivers or passenger kick panel. there should be a hole or little panel to remove to access. Kick panels are next to your ankle when driving.
I call a mechanic, someone who wouldn't ask the internet how to do it
Fuse panel to the left of drivers position behind hood release. Remove cover, 15 amp fuse
You can find the 1994 Pontiac Firebird window relay switch inside of the drivers side door. You will need to remove the drivers side door panel in order to access the window relay switch.
right above the drivers left knee..
Drivers side kick panel...
the right kick panel is in front of the passenger door , the left kick panel is in front of the drivers door
Using the correct sized screw driver, remove the screws and remove the clips that are in the door panel. Pull the panel away from the frame slowly, remove any wire connectors and then remove the panel from the frame.
You can't and will have to buy new ones or replace the instrument panel with a used one.
You remove and install the engine from the top.
On my 97, its in the fuse panel at the end of the dash. Open drivers door to get to the panel.
IT IS ABOVE THE GAS PEDAL. Follow 2 red wires over a little ledge and you will find the relay. First remove the panel under the steering wheel.
its located on the drivers side back side of head pan
If it is not on the fuse panel then it is on the back of the dash near the steering column.
use your mom
There is a fill plug on the side of the 1994 Camaro transmission. Remove the plug to check the fluid. The fluid should be high enough to be just before running out of the plug hole.