No special tool needed. Just go to your local AutoZone and find the correct fitting wrench and remove the 2 bolts holding the grill down. The rest is just a quick pull and your out.
Remove the 2002 Dodge Durango factory stereo decorative cover. Remove the factory stereo retaining screws. Pull the factory stereo out. Remove the wiring harness and the antenna cable from the back of the stereo.
Loosen the grip screws.
There is a frame around the radio that can be remove with a screw driver. Once this is remove you will be able to see four screws that need to be removed.
Remove the decorative stereo retaining cover. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness and the antenna cable.
Begin by removing the decorative cover from your 1990 Chevy Caprice factory radio. Remove the radio retaining screws. Remove the wiring harness and the antenna cable from the back of the radio.
open your cup holder and on the top lip of opening there will be two screws, remove those then the center dash piece can just be popped off. then theres just four screws holding in the factory stereo.
remove the face panel , it snaps in , under the CD palyer are 2 screws, remove then , pull it out and detatch the 2 wire pigtales
Remove the retaining cover to your 2005 Chevy Malibu radio. Remove the radio retaining screws. Slide the radio out. Remove the wiring harness and the antenna cable.
The factory tape deck on a 1996 Acura Integra can be taken off by removing the center console. Once the console is off remove the remaining mounting screws on the radio and pull it out.
its located behind the harmonic balancer, you must have a special tool to remove it. then there are four small screws that remove the cap.
If its a convertable, remove the the screws under the rear seat and remove. Then remove the screws holding the leather enclosures and remove from sill plate. remove the speaker boxes and replace. If you don't have new speaker boxes remove cover a speaker box, access speaker and replace, you will probably have to solder the wires, then reverse the order and put back together.
Remove the 1993 Toyota decorative radio cover in. Remove the radio retaining screws. Pull the radio out. Remove the wiring harness.