Asked in Ford ExplorerFord Explorer Eddie BauerFord Explorer XLTRadio
Ford Explorer Eddie Bauer
Ford Explorer XLT
How do you remove the factory radio from a 1993 eb explorer?
February 18, 2008 1:18AM
they make a tool you can buy at wal mart for about 3 to 6 bucks that you put in the four holes in the face of the stereo and you will be able to just pull it out very easy!
Asked in Mercedes-Benz 190-Series, DIY Projects
How do you remove the radio in a 1993 Mercedes 190E?
Asked in Cadillac DeVille
How do you remove the radio from a 1993 Cadillac Deville?
How do you remove the heater core on a 1992 Ford Explorer?
Asked in Buick Park Avenue, DIY Projects
How do you bypass the factory alarm on a 1993 Buick Park AV?
How to take off rotors on a 1993 ford explorer 4x4?
How do you remove the freeze out plug on a 1993 ford explorer?
Asked in Buick Park Avenue, DIY Projects
How do you disable factory alarm on a 1993 Buick Park AV?
Asked in Acura Legend
Where is the factory amplifier for the radio located in a 1993 Acura Legend?
Asked in Ford Escort LX, Radio
Remove radio on 1993 Ford Escort?
I have a '94 ford escort. To remove the factory radio you need a special tool that inserts into the pairs of holes found on the right and left sides of the radio. Once the tool is inserted, you will hear a "click" and be able to remove the radio. If you can't get the tool, you could try using something that will fit into these holes. You need to be able to insert something at least a few inches inside to disengage the locking mechanism. The locking mechanism is not complicated like a key, it just needs to be depressed to release.
What is best way to remove blower fan from 1993 ford explorer?
Asked in Toyota Camry
How do you remove the instrument cluster in a 1993 Toyota Camry?
It is not difficult. First you have to remove the 12vot cigarette lighter plastic and then remove the radio. 4 screws for the radio. Then you have to remove the panel that goes from the radio up to the instrument cluster. This panel has 4 screws. 2 of them are on top of the instrument cluster (visible) and the other two should be visible after removal of radio.
How do you install a car stereo in a 1987 Mercury Cougar?
I find that by going to www.crutchfield.com they have a lot of advice. I just installed a car stereo in my 1993 courgar and you need a special factory radio removal tool that has 4 prongs that will remove the radio. Then, you need to install the new radio as per directions. Additional mounting brackets may be needed.
How do you Remove a Stereo from a 1993 Ford Explorer?
Asked in Dodge Caravan, DIY Projects, Radio
How do you trouble shoot a radio in a 1993 Dodge Caravan The clock works but the radio does not Can you remove the radio and redo the wiring?
Asked in Honda Accord
How do you remove the stock CD player from a 1993 Honda Accord?
Asked in Ford Explorer
How do you change a front drivers side u joint on a 1993 ford explorer?
Asked in Chevy Cheyenne, Toyota RAV4, Chevy Blazer S-10
How do you replace the factory stereo on a 1993 Chevy Cheyenne?
What you need to acces is the factory amp/control for the radio which is under the dash right and above the gas pedal. Wire your radio harness and get your antenna adaptor. Unbolt and remove the factory amp and using the harness you unplugged, plug that into your nes harness and plug your new antenna adaptor to the mini gm antenna. remove the center panel between the cluster hump and glove box. pull the wires up from the bottom left of the hole in the dash. Take the new dash kit and put in the cage from your radio, put the a/c vents in the new dash kit, remove the two clips from the factory trim piece and put them on the back bottom edges of the new dash kit to hold in the bottom. Now plug in the harness and antenna, slide the radio in the kit and place the dash kit in the hole, top in first and push the bottom in. TAH-DAH new radio, and replace the speakers while you are at it you should have 4 4"x6" speakers.
How do you remove the stereo from a 1993 Suzuki Sidekick?