The 4.2 Liter and 4.9 Liter, 6 cyl engine, both have one large nut holding the clutch assembly onto the water pump.
Remove the radiator shroud.
You need two wrenches, one goes behind the clutch to restrain it from turning, and the other wrench removes the nut on the front of the clutch shaft.
It is a two man job, with one person under the vehicle restraining the shaft, and the other person on top, removing the nut.
You may have to remove the fan first, to get access.
You man have to remove the upper radiator hose on some models.
You need to rent or buy a fan clutch removal tool kit. you need to remove the fan and clutch as one before you can separate the fan from the clutch.
13726548
I am looking for a wiring diagram of a direction signal or flasher for a 1992 E150 Ford Van.
My 1992 E150 has a 35 gallon tank so I'm guessing your E150 is the same even though it is only one year newer than mine.
5.5 quarts
I have a 1992 ecoline E150 van andtrying too un hook the alarm
g7qQLk bviuxdmkojar
wer is the spout connector on 1992 ford e150 v8 5.0 liter
You need a special tool sold at most auto parts stores such as Autozone.
Remove the ignition retaining ring. Pull the ignition barrel out. Remove the wiring harness from the back of the ignition.
You probably mean a Ford E150 van. On my 1994 E150, the thermostat is behind the air cleaner. Remove the aircleaner assembly. Remove the air hoses that go to the throttle body. You will then see the upper radiator hose. The thermostat is located where the hose enters the engine. You probably mean a Ford E150 van. On my 1994 E150 V8 5.8L, the thermostat is behind the air cleaner. Remove the aircleaner assembly. Remove the air hoses that go to the throttle body. You will then see the upper radiator hose. The thermostat is located where the hose enters the engine.
call a locksmith