Ford Expedition Eddie Bauer
Ford Expedition XLT
1995-2005 Chevy Cavaliers

How do you remove the front door panel of a 2000 Cavalier to set the window back on track?

757677

Top Answer
User Avatar
Wiki User
2015-07-15 21:27:08
2015-07-15 21:27:08

I own a 2002 Cavalier and I found that I could not access the window through the inner panel. Try removing the mirror and the black trim on the outside of the door. Roll the window all the way down, get the window started on track(a paint stir stick worked well for me) then roll the window up. It might take a few tries. Anyway it worked for me. Good luck.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Remove the inside door panel of your 2002 Chevy Cavalier. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.

User Avatar

I have a 1992 cadillac seville. The window won't go up. The window motor is working. I want to see if the glass window itself is off the track. How do I remove the inside panel of the door to get to the glass window?

User Avatar

Remove the inside door panel. Remove the window motor track linkage. Remove the wiring harness. Remove the window motor retaining bolts. Reverse the process to install the new window motor.

User Avatar

THIS LINK SHOWS HOW TO REMOVE THE FRONT PANEL TO INSTALL AN ELECTRIC WINDOW MOTOR, BUT YOU GET THE IDEA. http://www.a1electric.com/vw.htm

User Avatar

Begin by removing the inside door panel. Remove the linkage from the window winder. Remove the window winder retaining bolts. The window winder will come off.

User Avatar

i have a '96 cavalier and all u have to do is stick a screw driver in the panel beside the radio to where u can get your fingers in there and just pull it out. but be careful that u dont break the panel or the clips.

User Avatar

On a UK car it is behind the driver's side front body panel. I had to partly remove the front bumper and the panel to replace it.

User Avatar

Open driver side door. remove inner door panel lower window pull it out of the bracket.

User Avatar

What kind of car/truck? I am changing the motor in a 99 cavalier. I have the door panel off and now I am trying to remove the motor.

User Avatar

You have to Remove the door panel. I think theres a few screws around the panel, once that's off your pretty much there. Just don't break or lose any pieces.

User Avatar

The horn is located in the right front corner of the fender of the car. You will have to remove the air deflecting panel just in front of the right front wheel to access it.

User Avatar

You can put a manual rollup window back on track, in your 1994 Chevy Cavalier, by removing the inside door panel. The window track is easily visible with the door panel removed.

User Avatar

take inside door panel off and the vent window is bolted inside the door as it also I believe acts as the front window channel.

User Avatar

To change the motor in the 1996 Chevy Cavalier driver's side window, first pry the interior door panel from the door. Then, remove the motor by first disconnecting the vehicle's battery and then disconnecting the wiring to the motor. You can then remove the screws that hold the motor in place.

User Avatar

remove front door panel 1995 Nissan maxima

User Avatar

Type your answer here...Front Side Door Trim Panel ReplacementTools RequiredJ 38778 Door Trim Pad and Garnish Clip RemoverRemoval ProcedureOpen the door.Remove the power window switch assembly. Refer to Front Side Door Window Switch Replacement - Left Side (See: Sensors and Switches\Sensors and Switches - Windows and Glass\Power Window Switch\Service and Repair\Power Window Switch Replacement - Left Front) or Front Side Door Window Switch Replacement - Right Side (See: Sensors and Switches\Sensors and Switches - Windows and Glass\Power Window Switch\Service and Repair\Power Window Switch Replacement - Right Front).Remove the screws from the front door trim panelRemove the front door trim panel using the J 38778 .Remove the power mirror switch. Refer to Power Mirror Switch Replacement (See: Mirrors\Power Mirror Switch\Service and Repair) if equipped.Reposition the electrical harness connectors.Remove the front door trim panel from the vehicle.Installation ProcedureImportant: Before installing the front door trim panel to the front door inner panel, the old trim panel retainers MUST be discarded and replaced with NEW trim panel retainers.Install the new trim panel retainers to the front door trim panel.Route the electrical connectors to the front door trim panel.Install the power mirror switch. Refer to Power Mirror Switch Replacement (See: Mirrors\Power Mirror Switch\Service and Repair) if equipped.Align the front door trim panel to the front door inner panel, guiding the front door handle through the trim panel.Install the upper edge of the front door trim panel to the top edge of the inner door panel, pressing down firmly until the front door trim panel is fully seated.Install the front door trim panel by firmly pressing the retainer clips until the clips are fully seated around the perimeter of the front door trim panel.Notice: Refer to Fastener Notice in Cautions and Notices.Install the screws to the front door trim panel. Tighten the front door trim panel screws to 2 Nm (18 lb in).Install the power window switch. Refer to Front Side Door Window Switch Replacement - Left Side (See: Sensors and Switches\Sensors and Switches - Windows and Glass\Power Window Switch\Service and Repair\Power Window Switch Replacement - Left Front) or Front Side Door Window Switch Replacement - Right Side (See: Sensors and Switches\Sensors and Switches - Windows and Glass\Power Window Switch\Service and Repair\Power Window Switch Replacement - Right Front).

User Avatar

You will need to remove the inside door panel. With the door panel removed the entire window mechanism will be visible. Set the window back on the track and secure it with the retaining clips.

User Avatar

1 open door 2 remove inner panel 3 lower window 4 take out window 5 remove (4) screws from regulator 6 take regulator of rails

User Avatar

On my '96 Cavalier, the horn is located in the front driver side wheel well. I had to jack it up, remove the wheel, and then access panel inside the well to get to the horn.

User Avatar

Remove bolts from inside of glove dep. Remove bolts under defrost vent. Remove bolts from panels on side of dash. I think there is a total of 6-8 bolts.

User Avatar

whwer is the fuse for front door window panel whwer is the fuse for front door window panel

User Avatar

how do i remove front control panel for bosch dishwast 4300 series. thank you

User Avatar

haw to remove front door panel vw sharan 2004?

User Avatar

Remove the front door trim panel. Remove the front window trim. Unplug the power mirror. Remove the access hole cover. Finally, remove the nuts holding the mirror to the door frame.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.