2000-2005 Dodge & Plymouth Neons

How do you remove the front door panel on a 2001 Dodge Neon with power locks and power windows?

456

Top Answer
User Avatar
Wiki User
2008-12-08 02:39:20
2008-12-08 02:39:20

Simple. First unscrew all the parts to the door panel. There should be screws along the entire edge of the door panel and some in the handle by the auto locks. Once all has been unscrewed, feel around the edges where the screws were. The door panel pops out so you have to feel around the panel edge for the catches. When you find a catch, apply pressure and the panel will simply pop out of the door. Be careful or you might break the plastic catches. Hope this helps. Georgia

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Remove the relay or fuse for the door locks.

User Avatar

Remove the power locks and windows fuse you will loose power for your windows also

User Avatar

Key combination [Windows+L] locks Windows XP.

User Avatar

check the back two legs -- lift up on the two outside push locks then lift up on the seat and pullback to get the hooks out of the front holes--- be carefull It's heavy.

User Avatar

Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). (Triangle looking shape near the side view mirror) 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. The installation is the reverse of the removal.

User Avatar

Key combination [Windows+L] locks Windows XP.

User Avatar

A pair of channel locks works great to take the hub off.

User Avatar

this a few bolts @ the bottom they are hung on by clips take the power swites off then pull up towards the window

User Avatar

Power Door locks (on passenager side) kickpanel. Windows are in the doors. Others Passenager side front near radiator.

User Avatar

make sure you remove all the things screwed into the panel like the arm rest/handle and the door handle/locks and pop off the window crank if the windows are manual. there are little plastic plug like things that 'screw' into the panel. they then pop into holes in the doorframe. just pull on the bottom, work your way up, then after they are all pulled then lift up the panel, then look for things wired into the panel like the door locks and the window buttons if the windows are electric.

User Avatar

First remove plastic panel above door to the front, covers for the bolts to the mirror. Remove courtesy light lens, unscrew one screw. Pop out the switches disconnect, remove second screw(IIRC, there should be two anyway, look around if it's not where the switches are.) Then simply lift straight up and it should come off without too much effort.

User Avatar

find all screws on inside of door remove them and just pop off the pannel.there are some wires to the power windows and door locks, that need to be unpluged and you are done!

User Avatar

First check for a blown fuse. Check to see if there is power at the motor. If there is power at the motor then the motor itself is bad.

User Avatar

The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.The dollar in front of the letter locks the column. When the formula with the reference is copied across, the letter will not change, like it would if there was no dollar in front of it.

User Avatar

on the front axle housing that locks front diff.in 4x4

User Avatar

The fourth fuse in the interior fuse panel controls the power windows and locks on 2000-2001 Grand Prix. 25 amp silver fuse.

User Avatar

# Disconnect negative battery cable # Remove all door trim panel retaining screws and door pull/armrest assemblies if equipped with power mirrors remove the switch knob by pulling it straight back and remove the switch retaining nut # Remove the window crank insert a putty knife between the trim panel and the door and disengage the retaining clips.Work around the outer edge until the panel is free

User Avatar

* On models with power door locks and/or power windows disconnect the negative battery cable.If equipped with Delco Loc 2 or Theftlock audio system make sure you have the activation code * On models with power door locks pry the power door lock switch out of the door trim panel with a flat-blade screwdriver unplug the electrical connector from the switch and remove the switch * On models with power windows pry the power window switch out of the trim panel with a flat-blade screwdriver unplug the electrical connector from the switch and remove the switch * On models with manually-operated windows remove the window regulator handle * Remove the trim panel screws * Once all of the screws are removed detach the trim panel from the door disconnect any electrical connectors and remove the trim panel from the vehicle by lifting it up and away from the door

User Avatar

What you probably need to do is to check you battery because i have a dodge 2004 also and my locks did the same thing so i just replaced my battery and the locks started working again.

User Avatar

Not Necessary but helps a lot: Jack the front of the car up on both sides and remove the front wheels. Remove the bolts that hold the plastic fender well up. If you look at the seam where the front bumper cover meets the right front corner panel (one's metal and one's plastic) there are more bolts to remove. Pop the hood, and remove the push locks that hold the plastic bumper to the metal frame in front of the engine on top of the radiator. The front bumper cover should fall off (if you don't want it scratched lay a towel down in front to lay the bumper on. From there, remove the two bolts that hold the front Chevy symbol to the bumper cover. and pop it off.

User Avatar

When removing the door panel, you need to remove all of the screws first. Then pull the door panel off. There should be screws around the edges or the door panel, and 1-2 screw on the door handle(on the inside). Then pop the door panel off, if the blazer has electric windows and locks you have to disconect them first, if it doesnt have power locks and windows, you have to take the window crank off,there should be a screw in the center of that. Unscrew the door lock and pull up. If it doesnt have them locks then you have to disconect it from inside the door panel

User Avatar

if the master switch is broken none of your windows or locks will work you can find one at a local auto wreckers


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.