The screws are around the door handle and the door latch pop out the plastic behind the latch their may be a screw underneath the door panel and lift the window switch cover out from the bottom next to the handle striaght up off the metal clip slide it through the door then just pop it off the retainers
You don't need to remove front door panels, the speaker grills come out.
how to remove door panel 06 cdallac sts
Remove the door panels
how to remove the door panels to re and re the speakesrs on a 2001 navigator ? how to remove the door panels to re and re the speakesrs on a 2001 navigator ?
How do I remove the front door panels on a 1996 Infiniti G-20. I am trying to install new speakers
I FOUND OUT MYSELF, THE DOOR PANELS SNAP OF AFTER REMOVING A FEW SCREWS,,EASY AS PIE?
The 2000 Mercury Villager front door panels are held in place with two retaining bolts and eight retaining clips. Remove the retaining bolts and pry outward on each retaining clip.
For removing the door side panels, See "Related Questions" below for specifics on the front & side doors.
You need to remove the front and rear seats. Remove the console, various interior panels and the door sill plates. Pull out the carpet.
1.- remove the doors panels 2.- remove the old factory speakers
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
remove the two screws under the pull handle. Then pull panel away from door starting at bottom and moving slowly to the top.
first, take the door panels off. next, there are four screws you have to remove. after that the speakers can be removed from the door, do not forget to disconnect the wiring harness from the speaker.
autozone.com has online manuals that give step by step how to
This is easy.. http://www.carstereohelp.com/stereoremovalNispthfndrDrPnlR.htm pictures and everything :)
Go to Neons.org, 2nd Gen link. You will find the information there.
remove the door panels
Removing the door panels from a 2001 Nissan Frontier is very simple. The door panel is held in place by a few screws only. Remove the screws and pull on the panel gently to remove it.
To remove the door panels in a 1987 Ford Ranger, simply crank the cover on the door to pry it open. Then remove the head screws inside and take off the other three screws.
Check out this website*** http://www.a1electric.com/grandam.htm *** It shows how to remove the panels on a 2002 model. It might be similar.
If the panels are like the 95 and 96 models, you don't need to remove door panels....carefully pop the grill covers off the door panels...there is a speaker mount behind the grill...remove the 4 speaker screws and your done. Start with the top of the grill and pull gently downward. There are metal clips on the cover and plastic hooks to the side which all hold it in place. Slow and careful is the name of the game here.
To remove the door panel on a 2000 Olds Intrigue, remove the lenses off any lights in the door. Then remove the screws holding in the light assembly. Using a screwdriver, gently pop off the clips in the corners and on the sides.
The four door Chrysler LeBaron door panels are held in place with two retaining bolts and eight retaining clips. Remove the retaining bolts and pry outward on the retaining clips.