The front wiper arms on a 1997 Mercury Villager clip off once they are bent backwards. To install the new wipers simply slide them into the clip.
The 1993 Mercury Villager takes 22" replacement windshield wiper blades on both sides front.
Pull the clips back and lift them off.
The wiper motor is located in front of the windshield under the cowl grille. 1. Remove both wiper arms.2. Remove six screws from the cowl grille at the base of the windshield.3. Open the hood.4. Remove the four plastic screwsand anchors from the forward edge of the cowl.5. Disconnect the washer hose and lift the cowl grille from the car.6. Locate the wiper motor on the driver side7. Remove the three bolts that hold the motor and the shaft nut that holds the wiper arm.8. Remove motor.
The 1995 Mercury Villager wiper blade sizes are 22" wiper blades on both sides front and a 13" rear wiper. Do not buy by length only though. See Sources and Related Links below for more information. Since there are over 22 different wiper arm attachments - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
2001 Mercury Villager takes 22" wiper blades on both sides front and a 14" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The 1993 Mercury Villager wiper blade sizes are 22" wiper blades on both sides front and a 13" rear wiper blade. See Sources and Related Links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The Mercury Villager wiper blade sizes are 22" wiper blades on both sides front and a 13" rear wiper. See Sources and Related Links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The switch just pops out of the dashboard.
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
Remove the wiring harness from the back of your 1995 Chevy Lumina front wiper motor. Remove the traveling arm linkage from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new front wiper motor.
1. Detach the small hose/line carrying washer fluid from the nozzle on the hatch door 2. pull the wiper arm from the axel of the motor, remove the wiper (if it is rusty, use flat head screw drive to remove) 3. Insert the wiper into new arm 4. Press the new wiper arm onto the wiper motor axel 5. connect the hose/line to the nozzle
It is usually locate on the firewall between the engine and the driving compartment. Read the owner's manual to understand where the wiper motor is located.