you get a hack saw and cut it off or get an alluminion blade to saw it off
NO! It will look awful Go get another one from ecklers
Remove the large bolt behind the visor,then move the handle down that unlocks the roof.
It doesn't. That's why they call it an FRC (Fixed Roof Corvette)
No. The 91 Corvette has a larger roof panel than the 88 Corvette's. yes if you change the front anchoring brackets
Fixed Roof Coupe Corvette... as far as i know no difference in performance
remove the dome light assembly the a b c pillars remove glass remove roof shade remove head liner complete remove all 4 drain hoses and un bolt roof carrier complete there are several 10 mm bolts remove complete
where is relay on 1994 Honda accord for sun roof
Roof with a Hole was created in 1994.
No, the roof is made from tiles, wood and metal.
there are 4 tx star(torx)bolts you need to undo,1 under each sun visor and 2 at the back of the panel roughly in line above the seats headrests.if the roof has not been taken off for a while you might have to give it a bit of ooomph!remove roof panel upwards from the back part first.you will need a tx star socket to undo the 4 bolts.
Lot of questions as to what is happening with it BUT - the BASIC "FIX" is to take it to a glass repair shop - or YOU can tighten the 4 screws inside just under the glass on the tracking frame. The glass itself may need to be pushed up to align with the roof edge before tightening/adjusting the screws on the tracking frame
To remove an old television antenna from your roof, you will need a ladder and a screw driver. You'll need to go up to the roof and unhook the antenna.
on what car???
SWB moon roof is removed by unclipping the 4 clasps.
reroute radiator to the top of the engine remove all glass and lights add roll bars to the drivers door, footwell and roof
in the perimeter of the roof. between the headliner and roof.
We need to tear out a spot on our roof. How difficult is it to remove and replace roof shingles on our own?
You need chemicals to remove lichen from a roof. Hire a professional to do it.
frame rail, on the roof pillar under the windshield among other places
Didn't make a convertible in 1984. It has Targa roof panel that can be removed with a tool.
so you can see if there bumming