To remove the harmonic balancer from a Nissan Maxima, first you need to removed the center bolt. After that, you can use a puller to remove the harmonic balancer. Before you do this, make sure you disconnect the battery and remove the drive belts.
the Knock sensor is located behind the Harmonic balancer pulley. on the bottom sidethe sensor is $95.00 remove the lock down screw unplug and replace
With a balancer puller tool. With a balancer puller tool.
use a harmonic puller
On most newer cars, the crank pulley is one piece with the harmonic balancer.... Remove it with a harmonic balancer puller.
The harmonic balancer tool is made especially to remove the balancer. Some stores will loan you the tool with a deposit.
Go to Autozone and tell them u need a harmonic balancer puller
Remove upper core support, remove radiator, remove belts, using a hormonic balancer puller(specific for chrysler) remove balancer.
The flywheel has to be held in place by a holding tool, Remove the mounting bolt, then use a balancer remover to pull the harmonic balancer.
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
remove front door panel 1995 Nissan maxima
How do I remove An 87 Nissan maxima gas tank
You need a balancer puller to remove it , It don't just slide off.