I detail headlights at used car dealerships and I have restored many Dodge Intrepids and other Chryslers. The dirt and yellow haze is on the outside and to clean it, I use a product called CrystaLenz. This product works really well and you DO NOT have to remove the lens or use any special tools. The headlight is an assembly, the outer lens does not come off.
how do you remove the flasher relay in a 2000 dodge intrepid. I got it unplugged but don't know how to remove it
Small screwsriver pop the metal speaker covers off..easy access to speakers from there
The voltage regulator on a Dodge Intrepid is inside the engine computer.
The bolts that hold it on are over torqued.
Yes they will , just change around the valve covers and intake from the new to the old.
Inside the trans pan.
Inside the front of the engine.
It is inside the trans, on the valve body.
It is inside the fuel tank. 1993-1997 there is an access in the trunk. 1998-2004 you have to remove the tank to access.
Under the coils on top of the valve covers
It is inside the passenger side of the dash.
It is located inside the of the fuel tank.
On the front of the crankshaft, under the timing covers.On the front of the crankshaft, under the timing covers.
You have to remove the pan, there is no drain.
You have to remove the pan and valve body.
You remove the cap and pour it into the coolant bottle.
Dodge Intrepid was created in 1993.
remove back seat then pull out and remove from mounting tray then that's it
Disconnect the electrical connector, remove the mounting screw and remove the sensor.
It is inside the valve body inside the transmission.