I have a 1999 Forester, but I imagine the 2003 is similar in this regard. You don't actually need to remove the headlamp to replace the bulb. On my car, I unplug the wire from the bulb at the back of the headlamp, remove the large rubber piece around the back of the bulb, unclip the clips that hold the bulb in place, remove and replace. Cheers! Mark
This is a good answer and is so just as stated. Thanks Mark!
RicT
Turn signal lever assembly can be replaced without removing the steering wheel. See instructions at the attached link question about replacing the headlight switch on a 1999 Subaru Forester.
30,000 miles
This was answered last week and is a simple procedure. One Phillips screw holds the parking light on in my 2000 Forester. You open the hood, remove the screw, pull the lamp assembly out and you have access to change the bulb. If you are asking about changing the whole assembly, the answer is the same. --Ken
Subaru Forester was created in 1997.
The towing capacity is 2000lbs with trailer brakes, and 1000lbs without. This info pertains to a Class I hitch assembly with a 1.25" ball on a Subaru Forester 98-01. If towing with an automatic transmission, first install a transmission cooler. **2001 Subaru Forester L Owners Manual.
Subaru Forester has a timing belt.
The 2005 Subaru Forester has 16 valves.
The 2009 Subaru Forester has 16 valves.
The 2008 Subaru Forester has 16 valves.
The 2001 Subaru Forester has 16 valves.
The 2003 Subaru Forester has 16 valves.
The 2006 Subaru Forester has 16 valves.