0
REmove the steering wheel then the lock plate. Then the t/s switch. Remove the key reminder contacts and there is a screw with a different head close to the lock cyl. Remove this screw and the lock cyl will come out. You will need a puller for the steering wheel and a tool for the lock plate both rentable from the parts store.
Wiki User
∙ 8y ago
Wiki User
∙ 10y agoNotice the small hole located in the face of the switch along side the key hole. Insert the ignition key and turn the key to the accessory position, using a stiff piece of wire such as a paper clip, insert the wire into the small hole and gently push the wire in as you continue to turn the key to the left beyond the accessory position. This will release the lock barrel from the switch, now pull the lock barrel out. You can now unscrew the chrome bezel that holds the switch assembly to the dash and remove the switch from behind the dash.
Wiki User
∙ 12y agoyou don't, you need a key.
Add your answer:
Earn +20 pts
How do you change the ignition lock cylinder in a 1989 Chevy Cheyenne when there is a key broke off in the ignition and it won't turn?
A locksmith may be able to remove the broke key and make a new one. Or just replace the ignition.
Do you need to change the key chip if you change the ignition switch in a terrano?
The ignition switch should be separate from the ignition key/lock assembly, so I'll say no.
How do you change the plastic rod that connects the ignition key cylinder to the ignition switch?
first you pull the plastic rod then turn on the ignition
How do you hot wire a 1988 Chevy Celebrity The ignition key is stuck in the accessory position and I need to start it and get it to the garage for a new ignition switch?
With the key stuck in the accessory position the steering wheel is locked and the gearshift is locked in the park position. Perhaps you should consider having a locksmith change the key cylinder where it is, or else have it towed to the garage.
Ignition was tampered with a screwdriver key will not enter the ignition need a part 2001 Chevy S10 pickup?
I'd call a locksmith. The ignition wil probably have to be drilled and replaced.
1970 camaro you have power to the dist with key on but you loose it when cranking the key?
change the ignition switch.
Change ignition on 2004 Chevy Malibu?
can I switch ignition cylinder with a different ignition cylinder w/key in a 2004 chevy Malibu without having to use a passcode
How do you change the ignition switch in a 1985 Chevy Cavalier?
i have 85 cavalier how you get key cycliner out
How do you remove ignition key stuck in Chevy colbalt?
how to remove key stuck in ignition switch in Chevy colbalt
How do you change the ignition lock cylinder in a 1989 Chevy Cheyenne when there is a key broke off in the ignition and it won't turn?
A locksmith may be able to remove the broke key and make a new one. Or just replace the ignition.
How do you program a key for a 2008 Chevy uplander?
How do you program a an ignition key for 2008 Chevy truck
Can't remove key from ignition switch?
i have a 06 Chevy cobalt and can't get the key out of the ignition switch
How do you start a Chevy Caprice?
By turning the ignition key...
Is the ignition key and the door key the same in a 2007 Chevy silverado?
Yes it is.
How do you remove an ignition key on a 1987 Chevy Monte Carlo with the key?
renel.voltaire@yahoo.com
Does 2005 Chevy Trailblazer have a key chip?
No. The anti theft is in the ignition not the key for that vehicle.
Where can you replace the ignition key to your 1990 Chevy Camaro?
the ignition keys are dealer only items.
