remove the screws that are around the side and bottom of panel.
remove covers located by mirror and by the door hinge. remove the screws you found
use a small bent screw driver and put it in the hole on the underside of the the close handle to push the cover off the handle. remove these two screws
remove the screw behind the door open handle.
pop off the cover that is over the mirror mechinism.
now pull up on the panel and voila!
yes?
remove drivers inside door panel and there are 2 or 3 bolts that hold mirror on from the inside after you diconnect the wire harness if it is a power mirror
how to remove the vent from dashboard of 1996 ford contour
Usually located behind the driver's door panel. Remove inside door panel for access
How do you remove the inside driver's door panel on a 2000 Volvo S40?
the fuse panel is on the end of drivers side dash. remove the panel, there should be a card inside
The drivers door panel has 12 retaining clips. Pry outward on each clip, one at a time. Remove the inside door handle retaining screws.
Try the right side of the dash when you open the passenger door. There may be a panel you can remove and hit the reset as is the case on many fords ------------------------------------------------------------------------------------------------- On a 2000 Ford Contour the fuel pump shut off switch ( inertia switch ) is in the drivers footwell , by the drivers left foot , behind the kick panel ( there is an access hole in the kick panel )
In the drivers footwell , behind the kick panel ( there is an access hole in the kick panel )
;how to remove drivers door panel to repair door restrictor
I have a drivers side (front) speaker that went out. I think the problem is a speaker connection. How do I remove the window crank (not power windows) and then the whole inside panel?
On a 1998 Ford Contour : The fuel pump shut off switch ( inertia switch ) is located in the drivers footwell behind the kick panel . There is an access hole through the panel ( it's near the inside hood release )