1st remove the screws on the inside of the door like were the door handle is and the window and lock controls , the door panels is held on by white door panel clips you should be able just to pull it off but you will have to buy new clips which are about 5 bucks at your auto store they just slip right onto the back of the panel
To replace the back speakers in a 2006 Acura TL, remove the SRS housing on both sides and the back panel of the speakers. Remove all wiring attached to the speakers and replace.
remove the door panel, there are 2 bolts that you can get to through holes in the inside steel panel. remove 2 linkages. the handle will then come off from the outside.
Which speakers and which moulding exactly are you refering to? If you are talking about the door speakers: Just remove the screws on the panel and inside of the door handle and inside of the armrest on the door there is a screw. Then you must remove the door handle by using a screwdriver to pry off the clip behind the door handle. After that just pop the panel off.
Remove the covers from your 2003 Chevrolet Avalanche speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
To replace the speakers in a Town and Country you will need to remove the old ones first. Consult your owners manual for how to take out your speakers.
Remove the door panel.
Yes you do and its a pain
In order to replace the speakers you have to flip down the rear seats and look at the screw ports and remove all the screws to remove the panel covering the speakers. The rest is self explanatory.
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
Remove the covers to your 1997 radio speakers. Remove the radio speaker retaining screws. Remove the wiring harness from the back of the radio speakers. Reverse the process to install your new radio speakers.
Remove the door panels and replace the speakers. They sit in baskets and are simple to replace. We have instructions at our enthusiasts forum. www.trailvoy.com
Remove the covers to your 2000 Chevy Malibu rear speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install your new rear speakers.