It should be the same as my 64 1/2. You have to remove the cross beam (two bolts). Remove the Idler Arm bracket from the passenger side and lower the steering connector rod. Remove bolts from around the pan and pull it out toward the front of the car over the steering connector rod. You may have to take out the starter to get at some of the bolts.
You need to unscrew the screws and remove the lid to remove the oil pan on a 2001 Ford Mustang with 3.8 motor.
I BELIEVE that is 4.5 quarts with engine oil filter change on the 1966 Ford Mustang STRAIGHT 6 cylinder engine
( Motorcraft FL-1-A ) engine oil filter for the 289 cubic inch V8 in a 1966 Ford Mustang
The 200 cubic inch straight 6 cylinder in a 1966 Ford Mustang holds ( 4 and 1/2 U.S. quarts with engine oil filter change )
Varies by climate, but 10-40 is pretty average
Remove the oil pan. This will give you access to the pump.
You can put it in there, it will just take a long time to fill the oil up. There will be an oil filler cap.
ask the people ask the parts store but i would put ford MotorCraft in it stay offical with the car
2.5 quarts of transmission fluid (type F, not FA).
What type of oil does a 1997 Ford Mustang 3.8 V6 use?
what is the oil capacity of a v6 19998 mustang
On a 3.8L 95 mustang the oil filter mounts to the oil pump.