Very simple procedure for the. Like many of today's modern designs, Mystique bumpers are all molded plastic and pretty light weight. They damage easily upon impact, making them nearly disposable when the damage is not too great. If not too extensive, bondo works well.
You won't have to get into the trunk to access any bumper fasteners. Four main nuts and bolts are visible from the underside - these come off with any standard ratchet tools. The top two sides are held on with two small Phillips bolts which are torqued in tight and should be removed with a ratchet, not a Phillips screwdriver.
Once these are removed, the bumper will pull straight out and off. Good luck!
You must remove the entire rear fender.
how to remove 2013 passat rear bumper
the rear speakers are located in the back doors. you have to remove the door panels to get at them.
inside fuel tank,you can remove rear seat to access it
Remove rear bumper on 99 ford tarrus
how do you remove and replace rear bumper on an xtype jag
To remove the rear bumper on the 2005 Nissan Sentra, you will first need to remove the rear bumper cover by using a flat tool to pry the pins. Then, access the bolts holding the bumper to the frame of the vehicle and remove the nuts. The bumper will then lift off.
Removing the Rear Bumper of a Passat...
The 1992 Mercedes-Benz 300 rear bumper is held in place with eight retaining bolts. You can remove the rear bumper by removing the retaining bolts.
The 1994 Ford Explorer rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off.
The rear bumper is held in place with eight retaining bolts. Remove the retaining bolts and the rear bumper will come off. Reverse the process to install your new rear bumper.
How to put rear break springs back on
The bolts are in the rear of the trunk.
The 2007 Santa Fe rear bumper is held in place by eight retaining bolts. Remove the retaining bolts and the bumper will come off.
unsnap rubber pad on top of bumper and remove and go from there .
The rear bumper on a Honda Civic is held on using several mounting screws. After remove each screw the bumper will be held on with mounting clips. The bumper can be gently pulled off.
Have a crunched driver side rear corner bumper. Looking for tips how to remove the skin. Thanks Dorel
how to remove rear seat from 1998 mercury villager
To remove the rear bumper cover on a 1993 Ford Taurus wagon, the lights need to be disconnected in the rear. Once all electrical connections are disconnected in the rear, remove the taillights and the fuel filler overflow hose. Remove any nuts and bolts holding the bumper cover on. Using needle nose pliers, pop the push pins around the bumper cover upwards. Slowly pull on the bumper to remove it.
To remove the spare tire on a Mercury Mariner insert the jack handle into the hole provided on the rear bumper of the vehicle. Turn the jack handle clockwise to lower the spare from underneath the vehicle.
Just use the "force" to remove It.
Behind / under the rear bumper there you will see 4 bolts on each side of the bumper. Have someone help you hold it while you remove the bolts. the installation is the reverse of removal.
The rear bumper of a 98 Chevy S10 can be removed by disconnecting the rear wiring harness and taking out the retaining bolts. The bumper can then be removed from the frame and pulled from the vehicle.
hi just bought a mazda 323f but need to remove damaged bumper how do i do it please
You must remove the bolts that connect the bumper to the frame from underneath the rear of the truck. Have someone hold the bumper so that it does not fall on you when you remove the bolts.