I was told by a friend the he actually beat on it from behind with a sledge hammer until it broke, then he could remove the remaining pieces,AnswerI just removed from a 1999. jacked up both rear tires and placed in neutral so i could turn the wheel. Sprayed around lug holes and rotated wheel so spray would spread underneath rotor.
beat on rotor from behind while rotating wheel.
then i took a 2' crow bar, placed tib of it against the back part of bracket that hold top of brake pads, and pulled back so it would pry against rotor outwardly, i kept rotating wheel and prying this way until it finally came loose. I did take a torch to the rotor first and heated it up but I don't think that helped much.
remove the brake caliper and the rotors come right off
you have remove the whole locking huh?
How do you remove the rotors on a 1992 ford aerostar?"
where is the sencor in a 2000 ford explorer
The Ford Escape went into production in 2000. So there is no 94 Escape
I just replaced mine, rotors had rusted away. Remove caliber, mine were rusted to the wheel hub, had to pry off. cleaned old rust off with steel wool, new rotors slid on with no problem
What is the speaker size in a 2000 ford explorer
Hire a mechanic!
How to Install Front Brake Pads Check Related links below.
how do you remove a fan blade from a 1998 ford explorer
Where is the EGR valve located on a 2000 Ford Explorer
tools you need for job
Is there a fuse I can remove for the ford explorer tire sensor
On a 2000 Ford Explorer : ( Yes , there are disc brakes , front and rear )
To disable the alarm on a 2000 Ford Explorer, remove the fuse designated to the alarm. You can also turn the key halfway on and leave it in the position for 10 to 15 minutes before starting the car.
Type your answer here... How do you remove ignition switch from 1992 ford explorer?
what other engine years are compatible with a 2000 ford explorer
how to remove the spare on a 2003 explorer
Warped brake rotors........
nope grease cap is not threaded, can usually remove it with a big set of channel locks
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotors Rotors should slide off hub
how do i remove the dome light cover on a 2007 ford explorer suv
( 21 ) U.S. gallons on the 2000 Ford Explorer four door