You have to use the flat end (looks like a big flat-head screwdriver) of the tire iron to crank it down from under the back of the truck. There is a small hole in the bumper to the right of the license plate. Counter clockwise lowers it.
It is under the rear of the vehicle.
In our 96 Blazer S10, it was behind the radio. We had to remove the radio to get to it.
1996 Chevy blazer timing chain
Remove the starter and remove the protector places behind the started
my Chevy blazer power seat on my 1996 Chevy blazer isn't working
what is the distributor setting for a 1996 Chevy blazer
what arethe 3 relays in the glovebox on a 1996 chevy blazer
or you talking about the driveshaft u-joint?
The 1996 Chevrolet blazer gas filter is in the fuel tank. Drain the fuel from the tank. Remove the gas filter retaining bolts. The gas filter will come out.
What is your 1996 Chevy blazer LS with a blown motor worth?".
A 1996 Chevy Blazer Does have a transfer case IF it is equipped with 4 wheel drive
The 96 Chevy Blazer does not have a timing belt.
YES they are the same.
the 1996 and 1997 are the same and would not work in your 2000 straight from GM
There is no "kill switch" on that Chevy Blazer.
It is a tight fit, but you can get to them from the top if you remove the distributor first.
Where is the location of fuel pump relay on 1996 Chevy Blazer?
They were not used on Chevy trucks.
you pour it in :)
That's what I am asking you. How do you replace a parking brake handle on an S-10 1996 Chevy Blazer?
It does not have one, You have to remove the fuel pump fuse are relay to shut the pump down.
seat fuse location for 1996 blazer
The bank 1 sensor 2 on a 1996 Chevy Blazer is mounted in the exhaust. Sensor two is just behind the catalytic converter.
When replacing brake pads a diagram may be needed. Diagrams to remove brake pads can be found in Chevy forums and in the specified auto books found in auto stores.