Hyundai Elantra
1995-2005 Chevy Cavaliers
Radio

How do you remove the stock radio from a 99 Hyundai Elantra?

293031

Top Answer
User Avatar
Wiki User
2011-09-12 20:36:00
2011-09-12 20:36:00

1. Take the whole console all around the stereo out first.

2. Make sure you pull your shifter to neutral so you can get it out easily.

3. Now take out the switch that dims your dash lights (near the wiper switch)

4. Take out the knobs to the fan and the other nob

5. Leave the four ways switch in.

6. There will be two screws that you will have to take out, but before you get to that you should be able to pull it out just a little (GENTLY!)

7. Under the steering column near the gas pedal there is a cable that goes to the fan. You will need to unplug it.

I know... I am doing this now to my car. Got past all that now I am installing a CD player.

And what a mess it is!!!

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

It does not have that option in the stock radio

User Avatar

Most auto parts stores can get you a wiring diagram for a 1996 Hyundai Elantra. If not in stock, the store can order a diagram for you.

User Avatar

The stock size for the GLS model is P195/65R15.

User Avatar

how do you remove the stock radio on a 1996 lexue es300

User Avatar

putting in aftermarket radio and need color codes for 1998 Hyundai Sonata GL L4-2.oL

User Avatar

The actual compononts in the radio or for the power/speaker plug on back?

User Avatar

Begin by removing the decorative radio retaining cover. Remove the radio retaining screws. Slide the radio out, remove the wiring harness and the antenna cable from the back of the radio.

User Avatar

* Remove the ashtray and ashtray holder * Remove the radio and mounting plate screws and lower the radio and unplug the electrical connector and antenna lead then push the radio out of the dashboard

User Avatar

im trying to find out the same thing

User Avatar

Remove Stock Ford RadioCheck related link below

User Avatar

The stock radio on a 2008 Ford F550 is removed by removing the trim and cover panels, disconnecting the wiring harness, and taking out the retaining screws. The radio can then be slid out of its housing and removed.

User Avatar

you will need to unscrew your dash and pull off the front plate of your dash, then you will need to unscrew the stock radio, then you will need to go ahead and pull out the adapter from the back of your radio.-Shocker

User Avatar

remove the exterior trim peace that surrounds the outer edges of the radio. Then there should be either two 10mm bolts or four phillip head screws holding the radio in place remove them and gently remove the radio from it slot and then unplug the wire harnesses and antenna in the back of the radio. repeat in reverse to reinstall.

User Avatar

how do you remove the stock radio from a 2000 ford focus zx3 Go to walmart in the car stereo section. In there, there are these packs of 2 U-shaped metal rods. If you buy theses, stick them in the correct holes in the radio then it will pop right out.

User Avatar

you will need to unscrew your dash and pull off the front plate of your dash, then you will need to unscrew the stock radio, then you will need to go ahead and pull out the adapter from the back of your radio. and that should do it-Shocker

User Avatar

first don't remove your stock stereo if u havn"t already. The radio works with the carscomputer to reset codes and other stuff. you can get an adapter that turns your speaker wire on the back of the radio into left and right channel to hook up to an aftermarket amplifier. then hook up your new speakers and sub woofer to the amp and use the stock radio to get your grove on. or install an after market radio in the glove box or middle console but don't remove the stock radio. get rid of the stock amp not powerful enough.

User Avatar

behind the farthest black button on the left is a screw, to remove get a screwdriver and pry it out.. also behind ashtray is 2 screws

User Avatar

You have to remove the whole lower panel of the dash with either Alan or torch wrench.

User Avatar

Remove ashtray by lifting up & out. You will see 2 Phillips head screws. Take them out. Remove ashtray bracket assembly. You will see 2 clips on the bottom of radio on both sides press both tabs down & pull out radio.

User Avatar

First you must remove the climate control knobs, then unsnap the cover panel with a screwdriver. Remove the two screw behind the panel and from behind the drink holder. Unsnap the plastic frame from the radio and lift it up to remove. Then remove 4 more screws fro the radio and it will slide out.

User Avatar

my 88 2.0 si radio was bolted in from the back and sides. start taking apart the console and get behind it to unbolt it

User Avatar

if your asking if you can put subwoofers on the stock radio then no you have to have an aftermarket radio

User Avatar

According to my brother (who is a mechanic), The stock stereo in the protege requires radio removal tools (2 sets) to remove -- you can get them at just about any parts store. Just carefully remove the molding around the radio, insert the tools all the way and then pull them outward to release the clips. The radio should just slide out.

User Avatar

you have to putt the dash apart starting with the shifter knob, have fun.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.