Open the trunk and you'll find the nuts on the wall behind the taillights. Unbolt them, there are about 5 to 7, and use the proper socket or pliers because they're a pain. If you just want to replace the bulb, there are wires leading to the twist-lock sockets. Untwist, pull, and you'll have bulb in hand!
remove the torx screws that hold in place, remove the bulbs from sockets
Remove the wiring harness from the tail light assembly in your 2005 Mercury. Remove the tail light assembly retaining bolts. The tail light assembly will come out.
You can access the Nissan taillights from the cargo compartment. Remove the tail light assembly cover. Remove the tail light wiring harness. Remove the tail light assembly retaining bolts.
You will need to remove the tail light covers in the cargo compartment. Remove the wiring harness. Remove the tail light assembly retaining bolts.
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
to replace the tail light open the hatch look on the side of the light you will see two screws remove them. Pull the light out, take the three bulb out ken
remove two screws, remove tail light, remove bulb. reinstallation is the reverse of removal.
See sources and related links below for 2006 Saturn Ion tail light lamp part numbers.
to replace tail light lens on a ford pickup. lower tailgate on side of bed that is hidden when tailgate is closed, you will see 2 screws. remove these screws and you can pull tail light out of bed.
No, there are no clips that have to be removed to take the tail light lens off. There should be 2 torque head screws or phillip head screws, and simply remove them.
Open the tail gate...you need to remove 2 screws that hold the tail light cover. The cover is also held in place by a couple of snap on fasterners so you need to pull the cover outward to take it off.
in side the trunk there are is gonna be carpwenting covering the metal part of the body you will see plastic screws remove that then remove the tail gate it self and your be able to remove the tail light in side the trunk there are is gonna be carpwenting covering the metal part of the body you will see plastic screws remove that then remove the tail gate it self and your be able to remove the tail light
There are 2 torx screws you need to remove located on the left/right side of the light. You can only see them with the trunk open. Then remove the light assembly. The sockets twist 1/4 a turn and then remove. Replace the light and reinstall assembly
the two top ones.
Inside trunk, remove thumb screw to fold back paneling near tail lights. Then remove three thumbscrews and the whole tail light assembly can be moved out to change light bulbs.
There are two screws on the iner side by the tailgate. simply unscrew and remove. Very simple and uncomplicted.
Remove the rear tail light assembly by pulling the carpet back and unscrewing three thumb screws. Pull out the tail light assembly and the bulb sockets will be visible. twist out the socket to access the bulb. Install is reverse.
Open trunk, there should be a few screws that hold tail light assembly to car. Remove screws and pull tail light assemble straight back.
open the hatch there are two screws remove them and the tail light will come out, after that there are three more screws remove them and you can get to the bulbs to replace them
Begin by removing the wiring harness to the back of your tail light. Remove the tail light assembly retaining bolts. The tail light will come off. Reverse the process to install your new tail light.
You can access the tail light assembly from the cargo compartment. Remove the tail light wiring connector. Push in and turn the lightbulb, at the same time, to remove it. Reverse the process to install your new tail lightbulb.
In the trunk by the right tail light.
If it is a New Beetle, open the liftgate and look on the inside in front of the tail lights. There should be a round disc that pops off. Remove this disc and behind it should be a knob that holds in tail lights. Remove this knob. Then go to tail light and as you stand behind car and look at tail light take a small screwdriver and insert it at 10 o'clock position of tail light (between rubber gasket of tail light and fender). Make sure you place a folded up rag under screwdriver. Pry light loose and remove. Once you change lights. Installation is reverse.
In order to change a bulb in the tail light of a Chevy Celebrity you must remove the tail light assembly from the car. To remove the tail light assembly" 1. In the trunk next to the quarter panel there are nuts that hold the rear header on, the center nut holds the tail light assembly on. It will be in the center of the tail light assembly near the outer edge. Take the nut off and pull the tail light assembly out until the stud clears the body. 2. Pull the tail light assembly to the side to disengage the tabs from the backup light panel. 3. Twist the appropriate socket to remove it from the tail light assembly, then unplug the lamp and replace it. Reverse the steps to reinstall the tail light assembly.
From inside the trunk you remove the three or four finger nuts to remove the entire taillight assembly. Once you get it removed you'll see the light plugs on the backside.