Take the valve cover off and scrap the gasket off with a razor. Be carful not to put any gouges in the on either side.
Remove the valve cover.....scrape off old gasket.....clean gasket surface on valve cover....apply gasket sealent to valve cover gasket surface.....set gasket in sealent.....reinstall valve cover.
how do i remove the valve cover to change the gasket in a toyota camry 1996
remove right valve cover on cadilac sts
i am going to change the valve cover gasket on my 97 cadillac catera, what do i need to remove and do? Is it hard?
Begin by removing the valve cover from your 1995 Dodge. Remove the valve cover gasket and clean the surface. Put the new gasket on and return the valve cover to its original position.
The valve cover ask it, on a S 40 Volvo, can be replaced by first removing the valve cover. Remove the old gasket and replace with a new gasket.
Begin by removing the valve cover retaining bolts. Remove the old belt cover gasket and clean the surface. Put the new valve cover gasket on and reverse the process.
do you mean valve cover gasket? remove the air cleaner. remove the bolts from the valve cover, remove old gasket, clean valve cover with parts cleaner or degreaser (rinse after) put new gasket, retighten screws alternating till snug but not far to tight. make sure you have the correct gasket, alot of places dont stock them and will need to order them.
just remove the 3 bolts on top of the valve cover and lift it out,and theres the gasket.
ondo valve cover, bolts remove valve cover, remove old gasket from valve cover and block. clean both surfaces well. put gasket glue on one side of gasket and install on cylinder head. align valve cover than replace bolts . tighten in a cross pattern until thet are snug. don't overtighten.
Remove the intake manifold retaining bolts on your 2003 Chevrolet Malibu. The manifold will come off. Remove the manifold gasket and clean the surface. Put the new manifold gasket on and reverse the process.
simply remove the valve cover gasket,take the old one off,clean the area well, and replace the gasket,tighten the cover evenly.(if ur gasket is made of corque take care not to break the gasket