answersLogoWhite

0


Best Answer
Copy

1)Pop the hood and Remove the four nuts directly behind the head lamp and in front of the battery that hold the lamp onto the radiator closure,

2) remove the one bolt on top holding the lamp to the radiator closure, this bolt is clearly visible as soon as you pop the hood.

3) Now pull out the headlamp module. If it doesnt budge, it is most likely cought on the bumber, wedge something in between the headlamp and the bumper, and presto it will come free.

That's four nuts and one bolt, these are all clearly visible and easily accesible. The bottom two nuts mite be a bit harder to completely remove because they are pushed agaisnt the air tube, just wedge them out. In all it should take no more than 5 min.

1)Pop the hood and Remove the four nuts directly behind the head lamp and in front of the battery that hold the lamp onto the radiator closure,

2) remove the one bolt on top holding the lamp to the radiator closure, this bolt is clearly visible as soon as you pop the hood.

3) Now pull out the headlamp module. If it doesnt budge, it is most likely cought on the bumber, wedge something in between the headlamp and the bumper, and presto it will come free.

That's four nuts and one bolt, these are all clearly visible and easily accesible. The bottom two nuts mite be a bit harder to completely remove because they are pushed agaisnt the air tube, just wedge them out. In all it should take no more than 5 min.

2011-09-12 20:36:51
This answer is:
πŸ€“
🀯
πŸ€”
User Avatar

Your Answer

Loading...

Related Questions

How do you replace the headlight assembly located on a 1994 Ford Ranger?

detach the bulbs and remove the clips behind the headlight assembly


How do you replace headlight bulbs on a 99 Tahoe?

First open the hood and locate the 5mm studs in front of the headlight you wish to replace. Remove the studs and gently pull out the headlight assembly. Remove the headlight assembly by twisting the connectors counter-clockwise. Remove the old bulbs from the assembly and replace with the new bulbs. Reconnect the assembly by attaching the connectors and twisting clockwise. Reinsert the assembly and and attach with the 5mm studs. Close the hood.


How do you replace head light bulbs on 1998 Chevy s-10?

Open the hood and notice the two black locking tabs sticking up behind the headlight assembly. Remove those two tabs by pulling on them straight up. This will allow the complete headlight assembly to come out the front. You can now remove the headlight bulbs from the headlight assembly.


How do you remove the headlight assembly from your 2001 prelude?

The headlight assembly on a 2001 Honda Prelude is held on by mounting brackets. Headlight housing can be taken off by removing all the mounting hardware and disconnecting the bulbs.


How do you change headlight bulbs on a 2001 Seville?

The headlight assembly (aka the headlight bucket) is removable by releasing the lock tabs behind the assembly. Once the assembly is wiggled out in the open you can easily replace the bulbs.


How do you replace headlights on 1999 buick lesabre?

Remove the entire headlight assembly to gain access to the bulbs.


How do you replace headlight bulbs on a 2001 Dodge Intrepid?

Directions straight from the owner's manual. 1. Open the hood and remove the headlight assembly mounting screws. 2. Pull the headlight assembly forward to access the bulbs. 3. Turn the bulb assembly retaining ring counterclockwise and pull the bulb and socket assembly from the housing. 4. Remove the bulb from the socket and replace the bulb. 5. Reinsert the bulb and socket assembly and turn the retaining ring clockwise to secure the bulb. 6. Reinstall the headlight assembly.


How do you remove headlight assembly on 2004 buick lesabre?

simply remove the two screws located on the top of the headlamp assembly and then pull the headlamp assembly forward to gain access to the light bulbs


How do you change the left running light on a 2002 silverado 1500?

Remove the headlight assembly to gain access to the bulbs.


How do you replace the headlight assembly located on a 1987 Chevy Caprice?

To replace the headlight assembly on the 90 Caprice, you may need to remove the grille. You will need a quality Torx(r) screwdriver. Once the headlight assembly is out of the vehicle, the bulbs can be removed. The bulbs turn about 75 degrees counter clockwise. If the vehicle has Halogen bulbs, be careful not to touch the glass tubes with your bare fingers as the oils from your fingers can cause the bulbs to fail.


How do you remove the headlight assembly on 2005 Cadillac STS?

To remove the headlight assembly you need to remove the front bumper cover. There are two bolts and one stud with a nut that hold the headlight in. Two of the fasteners are behind the bumper cover. Took me about two and a half hours. Make sure the problem is the bulbs. When it happened to me the bulbs were ok. The real problem was the relay was not grounded. The ground is what the switch controls.


How do you remove the headlight assembly on a 2003 Subaru Forester It must be removed to change bulbs other than headlamp?

according to the manual you have to remove the front grill and plastic lamp cover then unbolt the lamp housing to remove it then replace the bulbs - unfortunately it is very vague as to the exact procedure for removing the front grill. I dont think you actually have to remove the headlight assembly, you open the hood and get to the bulb through the back side of the headlight.


How do you replace turn signal switch 1996 dodge caravan?

To replace the turn signal switch of a 1996 Dodge Caravan, open the engine's hood to access the front turn signal bulbs. Then take the headlight assembly a little off the front to give room to get the bulbs. Remove the old turn signal switch and slip the new one in place.


How do you replace a daytime running light on a 2004 Suburban?

To replace the daytime running light on a 2004 Suburban, you will have to first remove the two metal pins that can be found on top of the headlight. The headlight assembly can be removed next. Pull out the plugs that are connected to the headlight assembly. Replace the bulbs and then reconnect the assembly.


How do you change the headlight bulb on 2004 Escape?

Remove the 2 bolts on top of the headlight assembly, then you can pull it out and remove the metal bar on the back that gives you access to the light sockets. Do not touch the light bulbs with your hands.


How do you replace standard bulbs with halogen bulbs on 2003 cadillac cts?

You will have to remove the front bumper cover and grill to access the headlight assembly. I paid about $100 to have it done at the dealer.Type your answer here...


How do you replace the light bulb on a 2002 Buick century?

By removing the locks that hold the headlight assembly in place you can wiggle the headlight assembly out to gain access to the headlight bulbs for replacement.


How do you change the headlight bulbs on a 2006 Impala Can the bulb sockets be reached underhood or do you have to pull the headlight assembly out to get at them?

You have to pull the headlight assembly off. But it's very easy to do so. just remove the hexagonal screw and pull the white tab up and BAM!! pulls right out.


What are the two lights in the Mercedes E320 wagon headlight assembly and how do you remove the lights?

The two lights in the Mercedes E320 wagon are the low and high beam bulbs. they can be accessed through the engine compartment. This bulbs just twist off the headlight housing.


How do you remove headlight assembly 1999 elantra?

# Unplug the electrical connectors and remove the halogen bulbs # Remove the front combination (park and turn signal) light housing and the screws along the top of the front bumper cover # Remove the headlight housing mounting bolts and remove the housing


Change headlamp 2004 Chevy Trailblazer?

If you can't reach inside and remove the rubber boot covering the back of the headlight assembly then do the following. Pull off the grill being careful not to break the clips or the plastic. Use a screwdriver to slide the dagger clips out that hold in the headlight assembly. You can see the tabs on the top inside and on the outside sides of the headlight assembly The headlight assembly will fall forward but you might have to remove the side marker light as the wires are very short. Now you should have easy access to the boots covering the bulbs. All bulbs remove with a twist and have tabs on them. www.trailvoy.com Trailblazer enthusiasts forum!


How do you replace the headlight assembly located on a 1991 Plymouth Acclaim?

Its held in with 4 star shaped screws... just disconnect the headlight bulbs, remove the screws and install the same way that you took that out with.


How do you replace the headlight assembly located on a 2000 Dodge Intrepid?

look in the users manual for the instructions on replacing bulbs. it's the same because you have to remove the assembly to replace the bulbs there are 2 jack screws , on the top of the assembly, one on each side. remove them and pull the assembly out towards the front of the car. remove the lights put the lights in the new assembly. put the new assembly back in and replace the jack screws. you will need to adjust the lights.


How do you replace the headlight bulb on 2008 Chevy Malibu?

Pull the complete headlight assembly out to get to the bulbs. You first have to pull the front bumper off, along with the wheel well to get to the headlight assembly.


How do you change the headlight bulbs on a 1996 GMC Siera?

You have to open the hood, unscrew the front turn siganls, remove the bulbs, remove the bolts holding on the grill, release the 2 bottom tabs of the grill(through the turn signal holes), make sure marker lights are disconnected and remove the grill. undo 4 bolts on each headlight assembly and remove/change/replace the bulbs. Intallation is reverse.