You need a special tool. You can probably get it at Autozone.
here is an other way!! use a clean rag and put in back of handle, move back and forth at clip , when cloth hits clip it will pop it off!
Remove the inside door panel of your 1997 Chevy Lumina. Remove the linkage to the window crank. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
You will need to remove the inside door panel of your 1977 Chevrolet blazer. Remove the window crank linkage. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
You need to remove the window hand crank with a window hand crank removal tool.
How to Remove or Install Car Window Crank Handles check related link below
To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
Pull out the U-clip located on the base of the window crank.
you can buy a window crank removal tool at an autoparts store that pulls the little pin off to remove it.
You can remove the window crank handle by just using a simple shop rag. How you do this you slide the rag(unfolded) between the door panel and window crank and rotate around the window crank until you snag the clip that is retain the window crank. The clip is a simple wire clip shaped like a "C" To reinstall you place the clip back in the groove on window crank and press back on the window regualtor shaft
To remove the window crank on the 1992 Toyota Paseo, first pry off the interior door panel. Then, access the screw that holds the crank in place. Remove the screw and the handle will come loose.
The 1997 Chevrolet Malibu crank position sensor is located on the back of the crankshaft. The rear engine cover will need to be removed in order to view the sensor.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
There is a clip on the back side of the window crank that you have to take off, then take the door panel off.