The 1994 Pontiac Grand Am ignition lock cylinder is held in place by the retaining ring at the top of the cylinder. Remove the retaining ring. Remove the wiring harness from the back of the cylinder.
In a 1988 Pontiac Grand Am you will find the clutch slave cylinder located on the flywheel. You will need to remove the hush panel from the driver's side foot well to gain access to the clutch slave cylinder.
you need to remove the top engine mount
where is valve cover located on a 2001 Pontiac Grand-Am 4 cyl
i just want to know how to remove the flywheel on a 1007 Grand AM Pontiac
how to remove a engine in a 1999 Pontiac grand prix 3.8L
Where is the starter on a 1998 Pontiac Grand Am, 6 cylinder
Remove the front tires, from your Pontiac Grand Prix. Remove the brakes and rotors. Unbolt the axle from the suspension. Remove the axle.
underneath the upper intake you need to remove the upper to service it
The thermostat on a 2000 Pontiac Grand Am 2.4 liter 4 cylinder is located on the side of the engine. It can be found by following the upper radiator hose.
The Pontiac Grand Am is more of a budget model, with a less powerful 4 cylinder engine and a shorter wheelbase. The Grand Prix is like a more deluxe Grand Am, with a more powerful 6 cylinder engine, and more room.
Computer controlled and not adjustable
how do you remove the back seat in the 2003 poniac grand am
You have to remove the head gasket to check in the cylinder. The click and flash should be obvious on a working spark plug
2006 Pontiac grand prix recurring number 4 cylinder misfire diagnostic code? What could it be?
The 2.2 litre four cylinder engine in a 2002 Pontiac Grand Am has a timing CHAIN
Follw the lower radiator hose off the side tank, under the engine to where it connects to the water pump. Remove this line and there it is.
just remove it
yes as long as the grand am is a 2.4 twin cam also
Remove the tire and wheel from your 2002 Pontiac Grand Prix. Remove the spring from the brake shoe. Remove the brake shoes. Reverse the process to install the new brakes.
Remove the instrument panel,take cover off on the front of the lock cylinder there are two 10mm bolts that mount it & remove it through the hole were the cluster sits..GM tech...