vtec malfunctions are mostly due to oil pressure issues. u might just be low on oil and its unable to create the pressure it needs to operate correctly
How do you turn off the check engine light on a 2001 honda accord?
Take it to the mechanic
The check engine light on a 2003 Honda Accord will be triggered when something on the engine is malfunctioning. To rid the check engine a light the ECU will need to be reset.
that is not a question
If the Check Engine light is on, then you have a problem with the emissions system. Once the repair is made the light must be reset with an OBD2 scan tool. If you do not repair the problem the light will just come back on.
That would be the check engine light.
You can reset the 2004 Honda Accord check engine light by removing the instrument light fuse. The location of the fuse can be found on the inside cover of the fuse box.
If your check engine light is blinking that means an engine cylinder misfire has been detected . You can drive it in for repair , just avoid any rapid aceleration or deceleration because you can damage the catalytic converter
A 2000 Honda Accord check engine light will stay on if the ECU is not reset. To reset the light remove the ECU fuse from the engine bay fuse box. Reinsert it after 5 seconds.
There is one, but it's not marked "check engine." It looks like a little engine with a lightning bolt on it.
The check engine light may be flashing on a 1996 Honda Accord if a timing issue is detected or oil pressure is low. The exact cause can be determined by connecting an OBDII code reader.
You will need to access a diagnostic computer to turn off the check engine light on the 2003 Honda Accord. You could also remove the fuse from the dash lights or instrument panel.